Silicon Pressure Transmitter

Silicon pressure sensor, also known as Diffused silicon pressure sensor. Piezoresistive diffusion silicon pressure transmitter, Silicon pressure transducer, also are this pressure sensors. Silicon pressure sensors are low cost. Silicon pressure sensors, can work for pressure and differential pressure measurement. Sino-Instrument can offer you with optical, according to your requirements. Silicon pressure sensors can work for water, air, gas, vacuum measurement.

Features of Silicon Pressure Transmitter

  • Ranges from (0 to 1) to
    (0 to 15) PSI
  • Accuracy: < ±0.25% BFSL (< ±0.5% BFSL for 0-1 PSI)
  • High strength stainless steel construction
  • Temperature range:
    • Operating; -40 to 185°F (-40 to 85°C)
    • Storage;-40 to 212°F (-40 to 100°C)
  • UL/cUL 913 (CSA 157) Class 1 Div 1 Groups C, D when installed with an approved barrier
  • No welds or internal O-rings
  • Low static and thermal errors
  • Unparalleled price and performance
  • Compatible with wide range of liquids and gases
  • HART ; 4-20mA
  • Burst Pressure: 5X or 75 PSI (whichever is less)

SIJC-1000HSM-Silicon Pressure Transmitter Applications:

  • Industrial OEM Equipment
  • HVAC/R Equipment
  • Water Management
  • Control Panels
  • Pneumatics
  • Hydraulic Systems
  • Vapor Recovery
  • Data Loggers
  • External Tank Levels

What is a piezoresistive pressure sensor?

Piezoresistive pressure sensors are one of the very-first products.

Those products are widely used in biomedical applications,

automotive industry and household appliances.

The sensing material in a piezoresistive pressure sensor is a diaphragm,

formed on a silicon substrate, which bends with applied pressure.

A deformation occurs in the crystal lattice of the diaphragm because of that bending.

This deformation causes a change in the band structure of the piezoresistors,

that are placed on the diaphragm,

leading to a change in the resistivity of the material.

This change can be an increase or a decrease according to the orientation of the resistors.

This variation in the sensitivity of the sensor will enlarge the application areas of the sensors.

Those sensors will also include temperature sensors.

With those, tem perature information can be obtained and can be used for temperature compensation purposes.

How does a piezoresistive pressure sensor work?

A Piezoresistive Pressure Sensor contains several thin wafers of silicon embedded between protective surfaces. The surface is usually connected to a Wheatstone bridge, a device for detecting small differences in resistance. The Wheatstone bridge runs a small amount of current through the sensor. When the resistance changes, less current passes through the pressure sensor. The Wheatstone bridge detects this change and reports a change in pressure.

You may like:

All of our pressure sensors can work with the NEW AMS TERX communicator.

Sino-Instrument can offer all kinds of silicon pressure transmitters.

Our pressure transmitters at a great price,

are widely used in South Africa, India, US, Indonesia, and other countries.

If you have special need, just contact us , we can offer:

OEM;

High-temperature pressure transmitter

Direct lead type pressure transmitter

Sanitary flat membrane pressure transmitter

Aviation plug type pressure transmitter

Hessmann pressure transmitter

LEVEL Transmitter

DP transmitter

Leave a Reply

Your email address will not be published. Required fields are marked *