Measure & Control Solutions

Capacitance Level Transmitter

Continuous level measurement and point level detection in liquids and solids with capacitance probes.

Capacitance Level Transmitter

Capacitance level detectorsalso known as Capacitance level transmitter, are also referred to as radio frequency (RF) or admittance level sensors. They operate in the low MHz radio frequency range, measuring admittance of an alternating current (ac) circuit that varies with level. Capacitance level sensors are a proved, as well as a cost-effective solution for level measurement, and point level detection in liquids and bulk solids. Various transmitters for continuous level measurement and switches, for point level detection are available. The measurement of the interface is also possible. The measuring principle is proven in millions of applications.

Sino-Inst offers a variety of  Capacitance Level Transmitters for level measurement. If you have any questions, please contact our sales engineers.

Features of SI700 RF capacitance level transmitter

  • Capacitive level measurement enables measurement without blind spots over the entire sensor length
  • Fully insulated capacitive sensors also measure aggressive liquids
  • Cost-effective measurement for trouble-free and maintenance-free operation

Capacitance measurement: Measuring Principle

The principle of capacitive level measurement,

is based on the capacitance change of a capacitor.

The probe and the tank wall form a capacitor,

whose capacitance is dependent on the amount of product in the tank:

An empty tank has a lower, a filled tank a higher capacitance.

A simple capacitor consists of two electrode plate,

separated by a small thickness of an insulator,

such as solid,

liquid, gas, or vacuum.

This insulator is also called as dielectric.

Value of C depends on dielectric used,

area of the plate and also distance between the plates.

Where:

C = capacitance in picofarads (pF)

E = a constant known as the absolute permittivity of free space

K = relative dielectric constant of the insulating material

A = effective area of the conductors

d = distance between the conductors

This change in capacitance can be measured using AC bridge.

Benefits RF Capacitance Level Transmitter

Proven and tested measuring principle – robust and safe

Universally adaptable probe

Reliable operation also in strong build-up formation and viscous media

Easy commissioning

Parameters of RF Capacitance Level Transmitter

FEATURES:

OPTIONS:

Applications of
Capacitance Level Transmitter

Capacitance Level Probes are used for measuring level of:

  1. Liquids
  2. Powered and granular solids
  3. Liquid metals at very high temperature
  4. Liquefied gases at very low temperature
  5. Corrosive materials like hydrofluoric acid
  6. Very high-pressure industrial processes.

To the high-temperature pressure transmitter.

Sino-Instrument supplies RF Capacitance level transmitters,

is used in bulk solids, such as pellets, granules, powders, slurries,

flow / no flow, conductive products and interface.

Request a Quote

Go to the full page to view and submit the form.

Exit mobile version