Turbine Flow Meters have always been popular. Especially for measuring various liquids, such as water, diesel oil, ethanol, etc. Of course, gas turbine flowmeters are becoming more and more widely used in natural gas and other measurement applications. It is very important for you to find a suitable and reliable Turbine Flow Meter manufacturer. Not only the price! What’s more important is the ability to customize the turbine flowmeter for your specific flow application!

Turbine Flow Meter Manufacturer

Sino-Inst, as a turbine flow meter manufacturer, provides high-performance liquid and gas turbine flow meters in various materials and accuracy. durable. Provides the performance needed to ensure optimal measurements.

Featured Industrial Turbine Flow Meters

Extended reading: High-quality hydraulic fluid flow meters

More Details About Turbine Flow Meter

A turbine flow meter is a type of flow meter that works by measuring the velocity of a fluid or gas as it passes through a turbine rotor. Turbine flow meters are commonly used to measure the flow of liquids and gases in a wide range of applications. They offer a high level of accuracy, especially in high flow rate applications, and can be used for both clean and dirty fluids. Turbine flow meters are also relatively easy to install and maintain, making them a popular choice in many industries.

Turbine flow meter Working Principle

Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument.

The principle of the turbine flowmeter is to place a turbine in the center of the pipeline, and the two ends are supported by bearings. As the fluid passes through the pipes, it strikes the turbine blades. Drive torque to the turbine. Make the turbine rotate by overcoming the friction torque and fluid resistance torque.

In a certain flow range, for a certain fluid medium viscosity, the rotational angular velocity of the turbine is proportional to the fluid velocity. Thus, the fluid flow rate can be obtained from the rotational angular velocity of the turbine, so that the fluid flow through the pipeline can be calculated.

The fluid to be measured impacts the turbine blades, causing the turbine to rotate, and the rotation speed of the turbine changes with the change of the flow rate. That is, the flow rate is large, and the speed of the turbine is also large. Then the rotation speed of the turbine is converted into electric pulses of corresponding frequency by the magnetoelectric conversion device. After being amplified by the preamplifier, it is sent to the display instrument for counting and display. According to the pulse number and cumulative pulse number per unit time, the instantaneous flow and cumulative flow can be calculated.

Turbine flow meters offer a number of advantages over other types of flow meters. Here are some of the key benefits of using turbine flow meters:

  • High accuracy: Turbine flow meters offer a high level of accuracy, especially in high flow rate applications. They have an accuracy of ±0.5% to ±1.0% of reading.
  • Wide flow range: Turbine flow meters have a wide flow range capability. They can measure flow rates from as low as 0.1 GPM (gallons per minute) to as high as 10,000 GPM, depending on the model and size.
  • Quick response time: Turbine flow meters have a fast dynamic response time, which means that they can measure changes in flow rate quickly.
  • Easy to install and maintain: Turbine flow meters are relatively easy to install and maintain. They don’t require a lot of space, and they don’t need a lot of external piping or support.
  • Versatile: Turbine flow meters can be used to measure the flow of a wide range of fluids and gases. Including hydrocarbons, chemicals, water, cryogenic liquids, air, natural gas, and industrial gases.
  • Customizable: Turbine flow meters can be customized to meet specific flow application requirements. Custom features may include: high temperature, extremely low temperature (-196 degrees Celsius), ultra-high pressure, extremely small diameter (DN4, DN6), etc.

Overall, turbine flow meters are a reliable and cost-effective method for achieving high accuracy flow measurement.

No, a rotary meter is a different type of flow meter than a turbine meter. While both are used to measure the flow of liquids or gases, they operate on different principles and have distinct designs.

A rotary meter, also known as a positive displacement meter, works by dividing the fluid or gas being measured into specific volumes and then counting the number of volumes that pass through the meter.

In contrast, a turbine flow meter works by measuring the velocity of the fluid or gas as it passes through a turbine rotor. The rotor spins at a speed proportional to the flow rate, and this motion generates an electrical signal that can be used to measure the flow rate.

While both types of flow meters are used for measuring the flow of liquids or gases, they are different in their operation and design.

As Manufacturer- We Can Offer

Extensive customization services:

  1. Product brand OEM
  2. Product parameters customization:
    • Temperature, high temperature or low temperature liquid (liquid nitrogen, liquid oxygen, etc.);
    • Pressure, especially high pressure products, 16MPa, 25MPa, 32MPa, etc.;
    • Small flow, small diameter (DN4, DN6);
    • Signal output: pulse, 4-20mA, RS485, etc.;
    • Hygienic customization: optional 304 stainless steel, 316 stainless steel, clamp installation;
    • Connecting flange: Accept flange thread customization such as German standard DIN, American standard ANSI, and Japanese standard JIS.
  3. Last but not least. We can offer you the most reasonable price. The cheapest price is not necessarily the best product. Reference: DN50 Turbine Flow Meter Price, FOB Price USD 298.00/set

Industries & Applications We Serve

Sino-Inst is one of the most reliable Turbine flow meter manufacturer and supplier in China.
A turbine flow meter measures volumetric fluid flow in a closed pipe. Turbine flow meters measure the flow rate of liquids, gases and vapors in pipes, such as natural gas, chemicals, water, cryogenic liquids, air, and industrial gases. Digital turbine flow meters can work as the eletromagnetic flow meters, and mass flow meter, for the inline flow measurement. But the turbine flow meter accuracy is the highest.

Sino-Instrument is the risk-free choice for your flow measurement applications.

Sino-Instrument, supplies turbine flow meters, like: gas turbine flow meter, gpi turbine flow meter, liquid turbine flow meter, sanitary turbine flow meter, insertion turbine flow meter, steam turbine flow meter, and natural gas turbine flow meter.

Sino-Inst ’s turbine flow meters, made in China. Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, US, and other countries.

Request a Quote