Featured Vortex Flow Meters

How Does Vortex Flow Meter Work?

A non-streamlined vortex generating body (bluff body) is provided in the fluid. Then two rows of regular vortices are generated alternately from both sides of the vortex generator. This vortex is called a Karman vortex street. As shown below.

The vortex rows are arranged asymmetrically downstream of the vortex generator.
Suppose the frequency of vortex occurrence is f, the average velocity of the incoming flow of the measured medium is V, the width of the upstream surface of the vortex generating body is d, and the diameter of the surface body is D.
According to the Karman vortex street principle, there is the following relationship:

f=StV/d

In the formula:
F – Karman vortex frequency generated on one side of the generating body
St-Strohal number (dimensionless number)
V-average flow velocity of fluid
d-width of vortex generator

It can be seen that the instantaneous flow rate can be calculated by measuring the Karman vortex separation frequency. Among them, Strohal number (St) is a dimensionless unknown number,

The figure below shows the relationship between Strohal number (St) and Reynolds number (Re).

In the straight part of St=0.17 in the curve table, the release frequency of the wandering vortex is proportional to the flow rate, which is the measurement range of the vortex flow sensor.

As long as the frequency f is detected, the flow rate of the fluid in the pipe can be obtained. The volume flow rate can be obtained from the flow rate V. The ratio of the measured pulse number to the volume is called the instrument constant (K). See formula (2)

K=N/Q(1/m³)

In the formula:
K=instrument constant (1/m³).
N=Number of pulses
Q=Volume flow rate (m³)

Composition of vortex flowmeter

A vortex flowmeter is like a clever detective that figures out how fast a liquid or gas is moving in a pipe. Let’s break it down:

• Bluff Body: This is a small, flat piece that sticks out in the pipe. When fluid (like water or gas) flows past it, it creates little swirls or whirlpools, called vortices.
• Sensors: These are the meter’s “ears.” They listen to and count these swirls. More swirls mean the fluid is moving faster.
• Transmitter: Think of this as the meter’s “brain.” It takes the count from the sensors and works out the flow rate, or how fast the fluid is moving.
• Display: Just like a screen that shows the score in a video game, the meter has a display. It shows the flow rate so people can read it easily.

In many places, from factories to water plants, people rely on vortex flowmeters because they’re accurate and trustworthy. They help make sure everything runs smoothly and safely.

What Are Multivariable Vortex Flow Meters?

MultiVariable Vortex Meter is a product concept proposed by Rosemount.
The Rosemount™ 8800 MultiVariable Vortex Meter automatically adjusts for changes in density, making it easy to accurately measure mass and corrected volume in steam and liquid applications. No moving parts or need to install impulse lines means fewer process upsets and smoother operations for your plant.

Rosemount’s Multivariable Vortex Flow Meters certainly have their unique technical advantages. For our Sino-Inst vortex flowmeter, we provide integrated temperature and pressure compensation or split temperature and pressure compensation.

So you may ask what is temperature pressure compensation?

What is the temperature and pressure compensation of a vortex flowmeter?

Temperature and pressure compensation: Temperature and pressure compensation is the correction made by the influence of the measured object on the pressure and temperature measurement under a certain pressure and temperature. At Tongchang, we provide the most temperature and pressure compensation when measuring gas flow, which is to obtain the flow rate under standard conditions by performing temperature and pressure compensation on the gas flow under working conditions.

Flow meters for the following measurement situations require temperature or pressure compensation:

1. When measuring gas, temperature and pressure need to be compensated at the same time. Gases are generally settled based on standard volume flow rates. Because the volume flow rate of the gas changes when the temperature or pressure changes, the flow rate will change.
2. When measuring saturated steam, single temperature compensation or single pressure compensation is required. The density of saturated steam has a fixed corresponding relationship with temperature or pressure (saturated steam density table). Knowing any of these, the density of saturated steam can be determined.
3. When measuring superheated steam, temperature and pressure need to be compensated at the same time. Steam is generally settled in terms of mass flow rate. Because either temperature or pressure changes, the density of the steam changes and the mass flow rate changes accordingly.
4. When measuring liquids, pressure compensation is generally not required. Below 5MPa, generally only the influence of temperature is considered, and temperature compensation is required for accurate measurement. In general measurements, you do not need to use any compensation; when measuring some hydrocarbons (such as crude oil), simultaneous compensation of temperature and pressure is generally required.

What Are Insertion Vortex Flow Meters?

Insertion vortex flowmeters are mainly used for flow measurement of large-diameter gas, liquid, and steam media fluids in industrial pipelines in various industries. For large pipe diameters, inline installation costs can be high.
Insertion vortex flowmeters are installed by drilling a hole in the process pipe with connections. Then insert the probe into the hole through the connection on the meter. For insertion vortex flowmeters, the probe should be inserted into the part of the pipe where the flow rate is highest.

What are the Applications for Vortex Flow Meters?

• Food & Beverage: Monitoring ingredient flow during product creation.
• Factories: Monitoring liquid and gas usage in production.
• Power Plants: Measuring steam flow for electricity generation.
• Oil and Gas: Overseeing extraction and transportation processes.
• Water Treatment: Managing water flow for purification.
• Pharmaceuticals: Ensuring precise measurements for medicine production.
• Chemical Industries: Overseeing chemical reactions and product development.
• HVAC Systems: Regulating heating, ventilation, and air conditioning flows.
• Pulp & Paper Mills: Managing liquid processes in paper production.
• Agriculture: Supervising irrigation and water distribution for crops.

What Media Can Vortex Flow Meters Measure?

We all know that vortex flow meters can measure gas, steam, and liquid. Based on our many years of service experience at Sino-Inst, we have compiled some measurable media:

• Water, Chilled or Hot
• Ultra-pure Water
• De-ionized Water
• Glycol Mixtures
• Solvents & Acids
• Natural Gas
• Steam (Saturated and Superheated)
• Air and Compressed Air
• Chemicals (Various Types)
• Hydrocarbons (like oil)

This is just a small part, you are welcome to leave a comment to add more measurable media.

What are the Advantages of Vortex Flow Meters?

• All-Rounder: Measures gases, liquids, and steam effectively.
• Budget-Friendly Setup: The initial cost isn’t sky-high.
• Low Maintenance: If the media is clean, it’s mostly fuss-free.
• Trustworthy: They are reliable and give accurate readings.
• Built to Last: No moving parts means less wear and a longer life.
• Flexible Installation: Place it at any angle, just make sure the core part (bluff body) is submerged.
• Unfazed: Temperature or pressure changes? It just shrugs them off.
• No Extra Heating Needed: Unlike some meters, it doesn’t need external heat to function.
• Efficient: Generally, it doesn’t cause much pressure loss.

What are the Disadvantages and Limitations of Vortex Flow Meters?

• Picky with Thick Liquids: Not the best choice for super thick or sludgy media.
• Stay Clean: Doesn’t like media that leaves a residue or forms crystals.
• Might Need Filters: Sometimes, extra equipment like strainers are needed.
• Precision Matters: Extremely high or low flow speeds? It might falter a bit.
• Steady Flow Needed: Pulsating or jumpy flows aren’t its cup of tea.
• Space Hungry: It often asks for a long straight pipe path for best results.
• Not the Batching Type: If you’re into batching processes, it might not be the best fit.

What is the difference between vortex and mass flow meter?

Vortex flowmeters and mass flowmeters are both important flow measurement instruments. Mass flow meters have a unique point: they can measure density.
Other comparison details are as follows:

Parameter	Vortex Flow Meter	Mass Flow Meter
Suitable for	Liquids, gases, steam	Almost all liquids & gases, including complex fluids
Not suitable for	High viscosity media, slurries	Very few; possibly some specialized applications
Accuracy	Inline type: ±1.5%R, Insert type: ±2.5%R,	0.1%R 0.15%R 0.2%R 0.5%R
Required upstream pipe (diameters)	There are requirements for straight pipe sections. For example, there is a 15DN straight pipe section upstream and a 5DN straight pipe section downstream.	The installation requirements are not high. There are no requirements for upstream and downstream straight pipe sections.
Relative cost	Generally lower	Typically higher due to complexity
Effect of viscosity	Can impact performance; not for high viscosity	Minimal effect; can handle varying viscosities
Moving parts	None	Might have sensors & heaters but typically no moving parts
Pipe size	DN15~`DN2000	DN3~DN200
Temperature	-40℃~350℃	-200～350℃

More Flow Measurement Solutions

Vortex Flow Meter Manufacturers

With a rich history and dedication to innovation, Sino-Inst has become a trusted name in the flow measurement industry. Over the years, our expertise in crafting state-of-the-art vortex flow meters has solidified our position as a leader in this domain.

Sino-Inst offers a versatile range of flow meter solutions, including both inline and insertion models. For those looking beyond traditional vortex meters, we proudly present our specialized solutions tailored for unique application requirements.

Ensuring reliability and precision, our products are a testament to our commitment to engineering excellence and customer satisfaction. To explore our diverse product range and delve deeper into the world of advanced flow measurement solutions, visit the Sino-Inst product page.

Request a Quote

Featured Pulse Flow Meters

what is pulse output signal?

A pulse output signal is an integral facet of modern flow measurement. Essentially, it is a series of electronic pulses generated each time a specific volume of fluid, such as water, passes through a meter. Think of it as the flow meter’s heartbeat, where every pulse equates to a predetermined volume of fluid.

The mechanics behind this are quite fascinating. Within many flow meters, such as turbine flowmeters, the fluid’s movement causes an internal rotor to turn. As this rotor spins, it interacts with sensors—often magnetic ones. Each interaction results in the generation of an electronic pulse. The number of these pulses directly corresponds to the volume of fluid that has passed through the meter. This real-time pulsating data representation is invaluable as it grants accurate, instantaneous measurements, making data interpretation and integration seamless in various systems.

Pulse Output vs 4-20mA

When diving into the world of flow measurements and signal outputs, a frequent comparison arises between pulse output and the traditional 4-20mA signal.

The 4-20mA signal is a staple in analog devices, providing a continuous current signal that correlates to the measurement variable. On the flip side, pulse output offers discrete, distinct signals.

While both pulse output and 4-20mA signals have their unique strengths, the digital character of pulse outputs typically allows for more precise data. This is especially true in applications that demand rapid response or detailed flow analysis. In essence, while 4-20mA signals give a continuous overview, pulse outputs provide granular, moment-by-moment insights, leading to a richer understanding of flow dynamics.

Pulse Flow vs. Continuous Flow

In the world of flow measurement, two prominent types emerge: pulse flow and continuous flow. Understanding their distinctions is pivotal for industries aiming to optimize their fluid management processes.

Pulse Flow Meters:

Pulse flow meters, as the name suggests, measure flow using a pulsating technique. With every predefined volume of fluid that passes through, the meter emits an electronic pulse. This digital representation makes it ideal for applications requiring precision and rapid data collection.

Key Features of Pulse Flow Meters:

• Real-time Data: These meters provide instantaneous measurements, giving an up-to-the-moment view of flow rates.
• Digital Precision: As they operate based on discrete pulses, they can offer granular data, capturing even minor fluctuations in flow.
• Versatility: Pulse flow meters can be integrated into various systems, making them suitable for diverse applications.

Continuous Flow Meters:

On the other hand, continuous flow meters offer a steady, uninterrupted measurement of fluid flow. Instead of discrete pulses, they provide a continuous analog signal, representing the flow rate over a period.

Key Features of Continuous Flow Meters:

• Consistent Monitoring: These meters are excellent for applications where continuous monitoring is essential, providing a holistic view of flow dynamics.
• Analog Output: They typically use signals like 4-20mA, offering a smooth data curve over time.
• Broad Range: Continuous flow meters can capture a wide range of flow rates, making them versatile for varied applications.

In Conclusion:
Choosing between pulse and continuous flow meters boils down to the specific needs of an application. Pulse flow meters shine in scenarios demanding detailed, real-time data. In contrast, continuous flow meters are the go-to for holistic, round-the-clock monitoring. By understanding their core differences, industries can make informed decisions, ensuring optimal flow management.

Pulse Flow Meter Working Principle

The Core Principle:
At its essence, a pulse flow meter operates by translating the flow of fluid into electronic pulses. Think of these pulses as the meter’s heartbeat, with each beat or pulse representing a specific volume of fluid that has flowed through the meter.

How It Works:

• Fluid Interaction: As fluid (be it water, oil, or any other liquid) passes through the meter, it interacts with a mechanism inside, often a rotor or a turbine.
• Rotor Movement: This fluid movement causes the rotor to spin. The speed of this rotation correlates directly with the flow rate of the fluid.
• Sensing the Rotation: Surrounding this rotor are sensors, usually of a magnetic nature. Each time the rotor completes a specific rotation or passes a point, it triggers these sensors.
• Pulse Generation: Every trigger from the rotor to the sensor results in the creation of an electronic pulse. This is relayed as an output from the flow meter.
• Data Interpretation: The number of pulses over time gives a precise measure of the volume of fluid that has passed through. The faster the fluid flow, the quicker the pulses are generated.

Why Pulse Signals Matter:
Pulse signals offer a clear advantage – digital precision. Unlike analog signals that provide a continuous representation, pulse signals give a moment-by-moment account of flow, making data interpretation straightforward and accurate.

Flow Meter Pulse Output to PLC: A Seamless Integration for Precision

In the landscape of industrial automation, the synergy between devices can be the linchpin of operational efficiency. A prime example of this is the integration of flow meters, specifically their pulse outputs, with Programmable Logic Controllers (PLCs). Let’s explore this integration and its significance.

In essence, when fluid passes through a flow meter, it results in the generation of electronic pulses. Each pulse represents a specific volume of the fluid, offering a digital snapshot of the flow rate.

PLCs serve as the brains behind many automated systems. They accept inputs from various devices, process this data based on programmed logic, and then generate outputs to control equipment or processes.

The Integration Process:

• Signal Transmission: The flow meter generates pulse outputs based on fluid flow. These pulses are then transmitted as electrical signals to the PLC.
• Data Interpretation: Upon receiving the signals, the PLC interprets the frequency of pulses to determine the flow rate. The higher the frequency, the greater the flow.
• Actionable Outputs: Based on the interpreted data and the logic programmed into the PLC, decisions are made. This can range from adjusting valves, triggering alarms, or even integrating with broader systems for holistic process control.

Benefits of Integration:

• Real-time Control: By continuously monitoring flow rates, PLCs can make instant adjustments, ensuring optimal operations.
• Data Accuracy: The digital nature of pulse outputs ensures precision, leading to accurate and reliable PLC actions.
• System Flexibility: The ability to program PLCs means that as system requirements change, adjustments can be made without altering the physical infrastructure.

The integration of flow meter pulse outputs with PLCs exemplifies the power of modern automation. This seamless synergy offers industries a reliable, flexible, and precise method to monitor and control fluid flow, driving efficiency and accuracy in operations. By understanding this integration, professionals can better harness the potential of their systems, leading to superior outcomes.

Applications of Pulse Flow Meters Across Industries

Pulse flow meters, with their unique ability to capture flow data through electronic pulses, have become an invaluable tool in various industries.

1. Manufacturing:
   In the vast world of manufacturing, maintaining a consistent and accurate flow of liquids—whether it’s raw materials, coolants, or finished products—is paramount. Pulse flow meters offer real-time monitoring, allowing industries to maintain product quality, ensure safety, and optimize processes.
2. Pharmaceuticals:
   Accuracy is non-negotiable in the pharmaceutical industry. When formulating medications, precise quantities of liquid ingredients need to be mixed. Pulse flow meters ensure that these formulations are consistent, safeguarding the efficacy and safety of medical products.
3. Energy & Power Generation:
   In power plants, especially those relying on liquid fuels or coolants, monitoring flow is critical. Pulse flow meters track the rate of fuel consumption or coolant flow, enabling plants to optimize operations and reduce wastage.
4. Agriculture:
   Modern agriculture heavily relies on irrigation systems. Pulse flow meters help farmers measure the flow of water, ensuring crops receive the right amount, neither too little nor too much.
5. Water Treatment:
   In water treatment plants, accurate flow measurement is key for processes like filtration and chemical treatment. Pulse flow meters provide reliable data, ensuring water quality and efficient treatment.
6. Food & Beverage:
   Whether it’s brewing beer or producing dairy products, the flow of liquids is at the core of the food and beverage industry. These meters ensure consistency in production, guaranteeing that every bottle, carton, or can meets quality standards.
7. Chemical Processing:
   In chemical plants, reactions often require exact quantities of liquid reactants. Pulse flow meters allow for precision, ensuring desired outcomes and minimizing risks.

More Flow Measurement Solutions

From everyday products to specialized applications, pulse flow meters play a silent yet significant role. They stand as guardians of quality, efficiency, and safety across industries. Recognizing their applications allows professionals to better utilize them, driving innovation and precision in their respective sectors.

But flow measurement doesn’t stop at pulses. From crude oil flow measurement, ensuring the smooth operation of our energy sectors, to liquid level measurement, vital for reservoirs, tanks, and storage facilities. Moreover, the precise temperature measurement instruments play a crucial role, especially in industries where slight temperature variances can impact product quality or safety.

With a rich legacy in the field, Sino-Inst stands at the forefront of measurement technology. As an experienced manufacturer and supplier, our portfolio extends beyond pulse flow meters. Whether you need customized solutions or off-the-shelf instruments, our team is ready to assist, ensuring you have the right tools for your unique requirements.

Request a Quote

Featured Turbine Flow Meters

How Does a Turbine Flow Meter Work?

When the fluid flows through the sensor housing, since the blades of the impeller(rotor) are at a certain angle to the flow direction, the impulse of the fluid causes the blades to have a rotational torque. After overcoming the friction torque and fluid resistance, the blades rotate. After the torque is balanced, the rotational speed becomes stable.

Under certain conditions, the rotational speed is proportional to the flow rate.

Since the blade is magnetically permeable, it is in the magnetic field of the signal detector (composed of permanent magnet steel and a coil). The rotating blade cuts the magnetic lines of force, periodically changing the magnetic flux of the coil. This causes an electrical pulse signal to be induced at both ends of the coil. This signal is shaped by the amplifier to form a continuous rectangular pulse wave with a certain amplitude. It can be remotely transmitted to the display instrument to display the instantaneous flow rate or cumulative total volume of the fluid.

Within a certain flow range, the pulse frequency f is proportional to the instantaneous flow rate Q of the fluid flowing through the sensor. The flow equation is:

Q=3600*f/k

In the formula:
f—Pulse frequency [Hz]
K-sensor instrument coefficient [1/m3], given by the calibration sheet.
Q-instantaneous flow rate of fluid (under working condition) [m3/h]
3600-conversion factor

The instrument coefficient of each sensor is filled in the calibration certificate by the manufacturer. The K value is set into the matching instrument. The instantaneous flow and cumulative total can be displayed.

How Accurate are Turbine Flow Meters?

When it comes to flow measurement, accuracy is paramount. Among the various tools and instruments available, turbine flow meters are often the choice for many industry professionals. But how do they stack up in terms of accuracy? Let’s dive deep and shed light on this critical aspect.

The Basics of Turbine Flow Meter Accuracy

At its core, a turbine flow meter’s accuracy is determined by its ability to measure flow velocity reliably. Generally, these meters boast an accuracy range of ±0.5% to ±1% of reading for liquids and ±1% to ±2% for gases under optimal conditions.

Factors Influencing Accuracy

Several elements come into play that can influence the precision of turbine flow meters:

• Fluid Properties: Variations in viscosity, especially in liquids, can impact rotor spin and subsequently, measurement accuracy.
• Flow Profile: Turbulent or laminar flow profiles can influence the meter’s readings. Proper installation, away from bends and valves, can help maintain a stable flow profile.
• Calibration: Calibration specific to the fluid being measured ensures that any discrepancies related to fluid properties are accounted for.

Turbine Flow Meter Types and Their Accuracy

Different designs and models cater to specific applications, each offering varying degrees of accuracy:

• Liquid Turbine Flow Meters: Often achieve accuracy up to ±0.5% of reading.
• Gas Turbine Flow Meters: Generally offer accuracy in the range of ±1% to ±2%.

What Does a Turbine Type Flow Meter Generate?

As we discussed earlier, the Turbine Flow Meter will generate pulses. The essence of a turbine-type flow meter lies in its ability to generate electrical pulses that correspond with fluid or gas flow rates. But what exactly is this output?

1. Pulse Generation – The Heartbeat of the Meter
   The fundamental output of a turbine flow meter is a series of electrical pulses. As fluid or gas courses through the meter, it drives the turbine rotor, causing it to spin. Each rotation, or even a fraction of it, generates a distinct pulse.
2. How Pulses Relate to Flow
   The rate at which these pulses are generated directly correlates with the flow rate of the fluid or gas. A higher flow rate will lead to a quicker rotor spin and, consequently, a higher pulse frequency. Conversely, a slower flow results in a reduced pulse frequency.
3. Sensing Mechanisms – Translating Motion into Electrical Output
   Positioned adjacent to the rotor is a sensor, typically magnetic or optical. As the rotor blades spin, they disrupt the sensor’s field, creating an electrical pulse. The frequency of these pulses, hence, represents the fluid velocity and is the primary data output.
4. Converting Pulses to Meaningful Data
   While the raw pulse frequency offers insights into flow rate, advanced electronic systems within the meter transform these pulses into actionable data. This can be displayed as volume per unit of time, totalized volume, or other relevant metrics, depending on the application.
5. Additional Outputs
   Modern turbine flow meters often come equipped with capabilities beyond basic pulse generation. Some may offer analog outputs, like 4-20mA signals, which can be integrated into control systems. Others might feature digital outputs for more sophisticated monitoring or control setups.

What are the Advantages of Turbine Flow Meters?

Turbine flow meters, renowned for their precision and adaptability, bring a suite of benefits to industrial processes:

• Cost-Effective: Generally, they are more economically priced when benchmarked against other advanced flow measurement technologies.
• Swift Responsiveness: These meters exhibit an impressive response time, with repeatability rates as high as 0.05%, ensuring reliable measurements.
• User-Friendly Installation and Upkeep: Their design facilitates straightforward installation and minimal maintenance, reducing downtime.
• Adaptable Mounting: Universal mounting positions offer flexibility during setup, accommodating varied industrial requirements.
• Direct Measurement: They provide direct volumetric flow measurements, eliminating the need for complex conversions.
• Advanced Monitoring: Many models are compatible with cutting-edge monitoring electronics, enabling data analytics and real-time tracking.
• Efficient Flow Dynamics: Their design results in minimal pressure drops, ensuring energy-efficient operations.
• Low Flow Sensitivity: These meters can detect flow rates as low as 0.01 feet per second, ensuring accurate measurements even at reduced flow rates.
• Wide range of use: Liquid turbine flowmeter can be made into an insertion type, suitable for large diameter measurements. Small diameter can be up to DN4.
• Strong compatibility: For different media, there are 304 stainless steel, 316 stainless steel, PE materials, etc. available.
• Customizable: Extremely low temperature (-196℃) and high temperature 180℃ can be customized. High pressure 16MPa, 25Mpa, 32Mpa, etc. can be customized.

What are the Disadvantages of Turbine Flow Meters?

While turbine flow meters offer numerous benefits, certain considerations can influence their suitability:

• Wear due to Over-Ranging: Operating beyond the meter’s maximum flow rate can accelerate wear, affecting its lifespan.
• Sensitivity to Contaminants: Certain models necessitate upstream filtering of ferrous particles to maintain accuracy. Moreover, magnetic particulates in fluids can hinder the output signals in some variants.
• Full Pipe Requirement: For optimal accuracy, pipes must remain consistently full, as partial flows can skew readings.
• Directional Limitations: By default, many models measure unidirectional flows. However, select advanced models can accommodate bi-directional flows.
• Optimal Media Conditions: They are ideally employed for clean media with low viscosities. High particulate or viscous fluids can challenge accuracy.
• Piping Considerations: To diminish flow turbulence, which can impact accuracy, they demand certain straight piping prerequisites upstream and downstream.

What are some applications for turbine flow meters?

Turbine flow meters, with their ability to provide rapid and accurate flow measurements, have found utility across a multitude of industries and applications. Below are some application introductions compiled based on our many years of service experience at Sino-Inst. Comments are welcome to add.

Oil and Gas Industry:

Oil Refineries: Turbine flow meters are pivotal in oil refineries for the precision measurement of crude oil and refined petroleum products.
Gas Distribution: They facilitate the measurement of gas flow rates, essential for billing and distribution.

Water Treatment Plants:

Monitoring and controlling water flow is crucial in these facilities, ensuring that adequate treatment processes are adhered to. Turbine flow meters serve this purpose by offering precise flow rate data.

Aerospace:

In the domain of aviation fuel testing, turbine flow meters ensure that the correct volume of fuel is dispensed, keeping safety and efficiency at the forefront.

Pharmaceuticals:

In drug manufacturing processes where specific volumes of liquids need to be transferred or mixed, these meters provide invaluable data, ensuring that the formulations are consistent and effective.

Dairy and Food Processing:

Turbine flow meters play a significant role in measuring the flow of milk, juices, and other liquid food products, ensuring quality control and correct product quantities.

Chemical Plants:

When it comes to transporting aggressive or corrosive liquids, turbine flow meters offer reliable readings, ensuring that processes remain within desired parameters.

Agriculture:

For irrigation systems, accurately measuring water flow is crucial. These meters ensure that fields receive the optimal amount of water, promoting effective crop growth.

Hydraulic Testing:

Engineers rely on turbine flow meters for hydraulic system testing to ensure that systems operate under designated flow conditions.

Extremely low temperature conditions:

Low-temperature turbine flowmeters are also used for flow measurement of liquid nitrogen, liquid hydrogen, and liquid oxygen.

Are Turbine Flow Meters Suitable for Water?

Turbine flow meters shine in measuring clean, low-viscosity liquids, making them well-suited for water flow assessments. Their precision in water measurements is commendable, often surpassing other mechanical flow meters. However, for optimal performance, it’s crucial to ensure the water is free from large particulates that might obstruct the turbine, as well as devoid of magnetic particles and iron which could skew readings. When these conditions are met, the turbine flow meter remains a reliable choice for accurate water flow evaluations.

What Other Liquids Can Turbine Flow Meters Measure?

Beyond water, turbine flow meters have carved a niche in measuring a diverse range of liquids, proving their versatility in various industrial contexts. Their precision and adaptability make them a go-to choice for several liquid applications. Here are some prominent liquids that these meters effectively gauge:

• Hydrocarbons: Fuels like diesel, petrol, and aviation fuel are commonly measured using turbine flow meters. Their consistent viscosity levels at operational temperatures make them an ideal fit.
• Chemicals: From solvents like acetone and benzene to more viscous chemicals like glycol, turbine meters can handle a wide spectrum of chemical fluids, provided they’re free from impurities that could hinder measurement.
• Alcohols: Ethanol, methanol, and other alcohols, often used in industrial processes or as fuels, can be accurately gauged with these meters.
• Pharmaceutical Liquids: Turbine flow meters cater to the pharmaceutical sector by measuring liquids like saline solutions, syrups, or even certain liquid medications.
• Food & Beverages: The food industry employs turbine flow meters for liquids like vegetable oils, fruit juices, and even dairy products, given the sanitary configurations available.
• Lubricating Oils: The lubricant industry benefits from turbine flow meters, using them for measuring various grades of lubricating oils.
• Cryogenic Liquids: With special configurations, these meters can even handle supercooled liquids, such as liquid nitrogen or liquid oxygen.

In conclusion, turbine flow meters are not just limited to water. Their broad spectrum of applicability across multiple industries, from petrochemicals to food processing, underlines their versatility and efficacy. However, always ensure compatibility and consider the specific requirements of each liquid for optimal measurement accuracy.

Can turbine flowmeter measure gas?

Turbine flow meters, while primarily designed for liquid measurements, are also adept at gauging the flow of gases. When tailored with appropriate design modifications and calibrated correctly, these meters can accurately measure various gases, from industrial to natural.

Takes into account the compressibility of the gas, the change in volume, temperature and pressure of the medium directly converts the flow under the working condition into the flow under the standard condition to ensure the accuracy of the measurement.

Our Sino-Inst gas turbine flowmeter is suitable for gas measurement in the fields of petroleum, chemical industry, aerospace, scientific research department, chemical industry and so on. It can be used for the measurement and measurement of natural gas, coal gas , propane, air, nitrogen and other gases. Used for trade measurement between users and process control between industrial production.

Are Turbine Flow Meters Inline or Insertion?

Turbine flow meters, given their versatility and adaptability, can be found in both inline and insertion models。Here’s a refined explanation of their distinct attributes:

Inline Turbine Flow Meters:
Popularity: These are the prevalent choice, especially when considering smaller pipeline sizes.
Design & Efficiency: Designed for a direct flow path, they offer an unobstructed measurement environment, ensuring maximum accuracy and efficiency.
Applications: Best suited for pipelines with smaller diameters, where precision is paramount.

Insertion Turbine Flow Meters:
Cost-Effectiveness: For those managing larger pipelines or higher flow velocities, insertion models are a more economical choice due to their design that doesn’t necessitate a complete flow body.
Installation: The process involves making a hole in the pipeline to insert the measuring probe. The electronics are then secured to the pipe via an integrated fitting.

What are the Straight Pipe Requirements for Turbine Flow Meters?

In order to eliminate the influence of liquid vortex and uneven cross-sectional flow velocity on the measurement, necessary straight sections or rectifiers should be installed at the inlet and outlet of the sensor.
Generally, the length of the straight pipe section in the upstream part (inlet) is required to be (15~20)D (D is the nominal diameter of the sensor).
The length of the downstream part (the straight pipe section at the outlet) is 5D, and the diameter of the straight pipe and the diameter of the sensor must be the same, otherwise it will cause measurement errors.

In addition, the length of the straight pipe section in the upstream part should be determined based on the status of the piping in front of the sensor. The general recommendations are as follows:

Do Turbine Flow Meters Have Digital Displays?

The turbine flowmeter can be configured with a local digital display. The LCD display can display instantaneous flow, accumulated flow, flow rate, etc.

Some customers only need signal output and do not need local display, so they will not configure a monitor.

Do Turbine Flow Meters Have Switches?

If you are purchasing a battery powered turbine flow meter. Then there is a switch for battery power.

If you are referring to the turbine flowmeter as a flow switch. So. Turbine flow meters sometimes offer integral or optional flow switch capabilities.

What is the K-Factor of turbine flow meter?

Definition of K-Factor:

The K-Factor of a turbine flow meter defines the number of pulses the meter will produce for a specific volume or mass of liquid passing through it. It’s typically expressed in pulses per gallon (PPG) or pulses per liter (PPL), depending on the unit of measure.

Significance in Flow Measurement:

By utilizing the K-Factor, one can accurately convert the number of pulses generated by the turbine flow meter into a quantifiable flow rate. This value is crucial when configuring flow meter transmitters or integrating the flow meter into process control systems.

Deriving the K-Factor:

To determine a turbine flow meter’s K-Factor, the meter is calibrated under controlled conditions using a fluid with a known density and viscosity. The number of pulses produced is then divided by the volume of fluid passed to derive the K-Factor.

Generally, after we produce the turbine flowmeter, we will calibrate it and standardize the corresponding K coefficient on the flowmeter.

Factors Influencing K-Factor:

• Fluid Properties: Changes in fluid density and viscosity can influence the K-Factor.
• Meter Wear: Over time, wear and tear on the turbine blades can alter the K-Factor.
• Flow Profile: Turbulence or varying flow profiles can affect the accuracy of the established K-Factor.

How Much Do Turbine Flow Meters Cost?

How Much Do Turbine Flow Meters Cost?

Ok. This is probably what most readers want to know.

First of all, the price of turbine flow meters is not constant. Depending on the measurement parameters, there will be different configurations. Then the price of turbine flow meter will also be different.

Here, we provide you with a reference price:

Liquid turbine flow meter

DN15
DC24V
Output two-wire system 4~20mA
LCD displays instantaneous flow and cumulative total
Body materialPE
Flange connection
Flow range 0.6~6m3/h
Accuracy 0.5%
Temperature resistance 65℃
Pressure resistance 1.0Mpa
ExdIICT6Gb explosion-proof
FOB Price USD 390.00/set

More Flow Measurement Solution

At Sino-Inst, we’re not just limited to turbine flow meters. We pride ourselves on our expansive range of instruments tailored for crude oil flow measurement, liquid level measurement, and temperature monitoring. With a rich heritage backed by experience, we’ve established ourselves as leading manufacturers and suppliers in the industry.

When it comes to reliability and accuracy, our instruments stand out. Our dedication to excellence stems from our profound expertise, ensuring that our clients receive products that not only meet but exceed their expectations. Looking for something unique? We offer customization to cater to your specific needs.

Contact us today and let our experts guide you to the perfect solution for your measurement challenges. Experience the Sino-Inst difference!

Sources:
Flow Measurement
Industrial Flow Measurement Basics and Practice

Request a Quote

What are Thermal Flow Meters?

Thermal flow meters, known by several names like thermal meters, thermal mass flow meters, calorimetric flow meters, and thermal dispersion flow meters, all operate based on the same fundamental principle. Regardless of the terminology, they all refer to a device that uses the concept of heat dispersion for measuring flow rates.

A thermal mass flow meter is an instrument that measures the mass flow rate of gases or liquids directly, utilizing the principle of heat dispersion. It offers accurate and reliable readings without requiring external temperature or pressure compensation.

More About Thermal Mass Flow Meter Specification.

thermal mass flow meter working principle

Understanding the operation of a thermal mass flow meter boils down to grasping the idea of heat dispersion or, in more technical terms, the thermal dispersion principle.

The thermal gas mass flow meter is designed based on the principle of thermal diffusion. The instrument uses the constant temperature difference method to accurately measure gas. It has the advantages of small size, high degree of digitization, easy installation, and accurate measurement.

The sensor part of the thermal gas mass flow meter consists of two reference-level platinum resistance temperature sensors. When the meter is working, one sensor continuously measures the medium temperature T1. The other sensor self-heats to a temperature higher than the medium temperature T2, which is used for sensing The fluid flow rate is called a speed sensor.

The temperature ΔT=T2-T1, T2>T1. When fluid flows through the sensor, the temperature of T2 drops as the gas molecules collide with the sensor and take away the heat from T2. To keep △T constant, the supply current of T2 must be increased. The faster the gas flows, the more heat it takes away. There is a fixed functional relationship between the gas flow rate and the increased heat, which is the principle of constant temperature difference.

The larger the temperature difference or differential, the higher the gas flow, and vice versa. By continuously measuring this temperature difference, the thermal mass flow meter provides a real-time reading of the gas flow rate.

In essence, these meters transform the straightforward principle of heat dispersion into a reliable method for gas flow measurement, embodying both precision and technological brilliance.

Benefits of Thermal Mass Flow Meters Compared to Other Types

Direct Mass Measurement: Thermal mass flow meters excel in providing genuine mass flow readings for gases. Unlike other meters which measure volume first and then convert it to mass, these devices directly measure the mass flow. This means there’s no need for separate temperature and pressure compensation, ensuring both convenience and accuracy in gas flow measurement.

Wide Range of Measurement: These meters are versatile, capable of measuring gas flow speeds as high as 100Nm/s and as low as 0.5Nm/s. This broad range makes them particularly useful for applications like gas leak detection.

Robust and Durable: The sensors in these meters don’t have moving or pressure-sensitive parts, making them resistant to vibrations. This design ensures a long lifespan and consistent measurement accuracy, even in shaky conditions.

Easy Installation and Maintenance: One of the standout features is the ability to install and maintain these meters without halting production, provided the site conditions allow for it. This feature may require customization.

Digital Design: Embracing the digital age, these flow meters are designed with fully digital circuits. This not only ensures precise measurements but also simplifies maintenance tasks.

Advanced Communication: With RS-485 or HART communication options, these meters can seamlessly integrate into automated factories. There’s also the potential for remote wireless monitoring, with options like WeChat APP integration available.

Flexible Power Options: Users have the flexibility to choose their power source, with options including AC220V, DC24V, or a dual power source of AC220V/DC24V.

These features highlight the technological advancements and user-centric design of thermal mass flow meters, making them an optimal choice for diverse industrial applications.

What are Thermal Mass Flow Meters Used For?

Thermal mass flow meters, with their precise and consistent readings, have found their way into numerous industries and applications. Their value goes beyond just the technology; it’s about the real-world problems they solve and efficiencies they introduce.

Thermal mass flow meter applications in Industries:

• Energy & Power Generation: Monitoring and controlling fuel gas flow in power plants ensures optimal combustion and energy efficiency.
• Chemical & Petrochemical: From chemical reactions to gas distribution, the accurate measurement of gas flow is essential in these sectors.
• Pharmaceuticals: Ensuring the right flow of gases in various drug manufacturing processes guarantees product consistency and safety.
• Food & Beverage: Whether it’s the carbonation in your soft drink or the protective atmosphere in packaged foods, gas flow regulation is key.
• Environmental Monitoring: They’re indispensable in monitoring greenhouse gas emissions or managing waste treatment plants.

Based on our many years of experience in gas measurement services. We have compiled and summarized the media suitable for thermal mass flow meters for your reference:

Gases Commonly Measured with Thermal Mass Flow Meters:

• Oxygen (O2)
• Nitrogen, (N2)
• Carbon dioxide (CO2)
• Hydrogen, (H2)
• chlorine gas,
• Argon (Ar)
• Helium (He)
• natural gas,
• Liquefied gas,
• fire energy,
• compressed air
• Multi-component gas measurement
• biogas,
• Methane (CH4)
• Aeration and chlorine measurement in water treatment,
• Gases,
• Carbon dioxide gas flow rate during beer production,
• Gas flow during semiconductor chip manufacturing process,
• Gas flow measurement in solvent recovery systems
• Refrigerators
• blast furnace gas,
• coke oven gas,
• flue gas,
• During the gas process, air,
• Calcining furnace flue gas,
• Combustion gas measurement in coal-fired boilers.
• Smoke flow (speed) measurement of smoked meat (CEMS)
• Primary air, secondary air,
• Mine ventilation or exhaust system flow,
• Gas flow (velocity) measurement in heating ventilation and air conditioning systems
• And many more… (Comments are welcome to add)

If you are not sure whether you can choose a thermal mass flowmeter for your measurement conditions, please feel free to contact our Sino-Inst technical engineers!

thermal mass flow meter installation guidelines

Installation location and pipe requirements

① When installing the instrument, keep it away from elbows, obstacles, reducers, and valves to ensure a stable flow field. One side requires a longer upper straight pipe. The length of the front straight pipe is greater than 10D, and the length of the rear straight pipe is greater than 5D.
The figure below shows the length of straight pipe sections required for several situations often encountered on site.

② When the requirements for straight pipe sections cannot be met on site, gas rectifiers can be connected in series. In order to significantly reduce the requirements for straight pipe sections.

Installation of insertion flow meter with ball valve

① Open a 20~22mm hole in the pipe, and then weld the base to the hole with the base flow meter.
② After opening the ball valve, screw one end of the ball valve to the external thread welded to the base of the pipe (check the lock to prevent leakage), insert the probe rod and tighten the locking head (pay attention to the flow direction).
③When inserting the probe rod, pay attention to the insertion depth: insertion depth = A-B (1/4~1/2 of the inner diameter of the pipe).
④ If the medium contains moisture, oil or impurities, please refer to the figure below for installation (45 degrees below the pipe).

Installation of pipeline flow meter

Customers of pipeline flow meters do not need to select the insertion depth. They only need to select the flow rate corresponding to the diameter in the flow range table. When installing, just connect the flange (thread or clamp) of the flow meter to the pipe and fix it.

Selection Guide

Based on our many years of experience at Sino-Inst. We recommend that you consider the following measurement parameters when selecting a thermal mass flowmeter:

1. Installation form: such as pipeline installation, plug-in installation, threaded installation, flange installation, etc.
2. Pipe diameter (square pipe or round pipe)
3. Conditions of the medium being measured
4. Sensor material requirements
5. Pressure and temperature inside the pipe
6. What signal output is needed?
7. Power supply requirements: Generally 24VDC, or 22VAC
8. Explosion-proof requirements, etc.

More Flow measurement technologies

Thermal mass flow meters, with their precision, durability, and wide applicability, have emerged as a front-runner in gas flow measurement. But the scope of modern measurement tools doesn’t end here. Advancements in technology have also paved the way for specialized instruments in other areas. For those involved in the oil industry, understanding crude oil flow measurement is crucial. Likewise, ensuring accuracy in liquid level measurement and temperature measurement can make all the difference in various applications, ensuring safety, efficiency, and product quality.

At Sino-Inst, our journey extends beyond just offering products. With a rich tapestry of experience, we stand as a leading manufacturer and supplier in the instrumentation arena. Whether you’re seeking standard instruments or looking for customized solutions tailored to your unique requirements, our team is here to assist.

Request a Quote