Q: How is hydrostatic pressure measured?

A submersible pressure transducer or a flush pressure sensor measures the height-dependent weight-force of the liquid column, also known as hydrostatic pressure. This pressure measurement is directly proportional to the liquid level respectively liquid column, at the measuring point of the pressure sensor. It is, therefore, necessary, for the measurement of level, that the pressure sensor is placed as close as possible to the level of the vessel’s bottom. The measured hydrostatic pressure then directly corresponds to the height of the liquid column, from the ground-level measurement point to the surface-level of the medium. So, the filling height is calculated from the distance of the medium surface, to the measuring point by the pressure measurement. The weight force of the liquid column, thus the hydrostatic pressure , however, is not only directly proportional to the filling height but also varies with the specific gravity of the medium and the force of gravity. Read more about: Differences! Static pressure vs dynamic pressure vs total pressure

Question 1

How is hydrostatic pressure measured?

Accepted Answer

A submersible pressure transducer or a flush pressure sensor measures the height-dependent weight-force of the liquid column, also known as hydrostatic pressure.
This pressure measurement is directly proportional to the liquid level respectively liquid column, at the measuring point of the pressure sensor.
It is, therefore, necessary, for the measurement of level, that the pressure sensor is placed as close as possible to the level of the vessel’s bottom.
The measured hydrostatic pressure then directly corresponds to the height of the liquid column, from the ground-level measurement point to the surface-level of the medium.
So, the filling height is calculated from the distance of the medium surface, to the measuring point by the pressure measurement.
The weight force of the liquid column, thus the hydrostatic pressure, however, is not only directly proportional to the filling height but also varies with the specific gravity of the medium and the force of gravity.
Read more about: Differences! Static pressure vs dynamic pressure vs total pressure

Question 2

What is hydrostatic pressure water?

Accepted Answer

Hydrostatic pressure is the pressure that a homogeneous fluid acts on an object.
This is a omnidirectional force that is evenly applied to all parts of the surface of the object. Increased hydrostatic pressure will reduce the volume of the stressed object, but will not change its shape

Question 3

What is hydrostatic level transmitter?

Accepted Answer

Hydrostatic level transmitter is actually a type of pressure transmitter. Hydrostatic level transmitter is the application of pressure transmitter to liquid level measurement. The submersible Hydostatic pressure level transmitter is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. Piezoresistive effect using diffused silicon or ceramic sensitive elements. Convert static pressure into electrical signal. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output. In order to achieve liquid level measurement.

Question 4

How do you measure pressure using a level transmitter?

Accepted Answer

Usually we measure the liquid level by measuring the pressure.
When the liquid level transmitter is put into a certain depth in the measured liquid, the pressure formula of the sensor facing the liquid surface is: Ρ = ρ.g.H + Po. In the formula:
P: the pressure on the liquid face of the transmitter
Ρ: measured liquid density
G: local gravity acceleration
Po: atmospheric pressure on the liquid surface
H: Depth of transmitter into liquid
At the same time, the pressure of the liquid is introduced into the positive pressure chamber of the sensor through the air-conducting stainless steel. Then connect the atmospheric pressure Po on the liquid surface to the negative pressure chamber of the sensor. To offset Po on the back of the sensor, the pressure measured by the sensor is: ρ.g.H. Obviously, by measuring the pressure P, the liquid level depth can be obtained.
Of course, if the liquid level is measured, the pressure value can also be converted.
Read more What is a diaphragm seal?

Question 5

Can a pressure transmitter be used to measure level?

Accepted Answer

Yes. If it is an open tank use a transmitter. If it is pressurized, 2 pressure transmitters must be used (the difference in the software is the liquid level height). The range unit of the transmitter is preferably mmH2O.
If the medium is not water, its density must also be known. This allows for span correction (top transmitters do not do span correction). Generally, a double-diaphragm differential pressure transmitter is used to detect the liquid level.

Year: 2020

Hydrostatic Level Measurement

SI-302 Anti-corrosive Submersible Level Transmitter

Magnetostrictive Level Sensor in Storage Tank Level Measurement

Remote Seal Differential Pressure Transmitter

Extended Diaphragm Seal DP Level Transmitter

SI-801 Piezoresistive Differential Pressure Transmitter

SI-338 Ceramic Pressure Sensor

SI-706 Combined Pressure and Temperature Sensor-Dual function

SI-512H High Temperature Pressure Sensor

SI-PT series Melt Pressure Sensors/Transducers – High Temperature