11A Static Torque Sensor Flange-to-Shaft Mount

11A Static Torque Sensor Flange-to-Shaft Mount, the resistance strain is an integrated product composed of sensitive components and integrated circuits. Static torque measurement. One end is a key connection, and the other end is a flange connection, which is easy to install and use.

Featues of 11A Static Torque Sensor Flange-to-Shaft Mount

  1. The resistance strain is a sensitive element. High precision, stable and reliable performance;
  2. Low-range torque measurement. Easy to install and use;
  3. One end is a key (through slot) connection. One end is a flange connection;
  4. Suitable for static torque measurement.

Technical Parameters

ParametersTechnical indicators
Range0.5,1,2,,5,10,20,30,50,100Nm
Sensitivity1.5±10% mV / V
Zero output±1% F.S.
Nonlinear±0.1,0.3% F.S.
Hysteresis≤±0.05% F.S.
Repeatability≤±0.05% F.S
Creep≤±0.03% F.S/30min
Temperature Sensitivity Drift0.03% F.S. / 10℃
Zero temperature drift0.03% F.S. / 10℃
Input resistance350,750±10Ω
Input resistance350,700±5Ω
Response frequency100μS
Insulation resistance≥5000MΩ/ 100VDC
Excitation voltage10VDC(9-15VDC)
Temperature Compensation Range-10 ~ 60℃
Range of working temperature-20 ~ 65℃
Safe overload150% F.S.
Extreme overload200% F.S.
Cable sizeØ5.2×3m
Electrical connectionsRed/E+, Black/E-, Green/S+, White/S-
MaterialAluminium, stainless or alloy steel
Other requestCustomizable

Dimensions

11A Static Torque Sensor Dimensions

Learn More About 11A Static Torque Sensor Flange-to-Shaft Mount

The static torque sensor is an instrument that converts the strain generated by the torsional moment into an electrical signal with a linear relationship according to the principle of resistance strain.

This static in a static torque sensor means that the measuring elastomer of the sensor does not participate in relative motion.

It is widely used in testing machines, static torque detection and other test systems, and has been praised by users for its excellent stability, high measurement accuracy and high cost performance.

The basic principle of static torque sensor:

Using strain gauge electrical measurement technology, a strain bridge is formed on the elastic shaft, and the electrical signal of the elastic shaft torsion can be measured by supplying power to the strain bridge. After the strain signal is amplified, it is converted into a frequency signal proportional to the torsional strain after pressure/frequency conversion. Or directly output standard 4~20mA current signal and 1~5V voltage signal.

  1. Detection of output torque and power of rotating power equipment such as electric motors, engines, and internal combustion engines;
  2. Detection of torque and power of fans, water pumps, gearboxes, torque wrenches;
  3. Detection of torque and power in railway locomotives, automobiles, tractors, airplanes, ships, and mining machinery;
  4. It can be used for the detection of torque and power in the sewage treatment system;
  5. Can be used to manufacture viscometers;
  6. Can be used in process industry and process industry;
  7. Can be used in laboratories, testing departments, as well as production monitoring and quality control.

The static torque sensor is not much different from the dynamic torque sensor, the key is the sampling speed of the secondary instrument.

Dynamic torque sensors are generally used to test situations where the torque fluctuates sharply. It is necessary to capture torque or torque peaks, such as tightening machines, electric wrenches, motor output torque, engine output torque, and drill pipe torque.

The static torque sensor is generally used to test the occasions where the torque changes slowly. The sampling speed is generally lower than 50 times per second. Such as testing the manual torque wrench, the static load torque of the transmission, etc.

In some cases, because the test object is rotating, the dynamic torque sensor can also be rotated for the convenience of testing.

The dynamic torque sensor can measure the electric signal of the torsion of the elastic shaft. It adopts the strain electrical measurement technology. A strain bridge is formed on the elastic shaft to provide power to the strain bridge. After the signal is amplified, it is converted into a frequency signal proportional to the strain through voltage-frequency conversion.

The static torque sensor converts the strain generated by the torque torque into an electrical signal that has a linear relationship with it according to the principle of resistance strain.

Static torque sensor rotation cannot exceed 360 degrees. If you need to measure the static working torque of the equipment. Both static and dynamic torque can meet your measurement requirements. In order to save costs, we recommend that you choose static torque sensor measurement. If you need to measure the torque of the equipment when it is working dynamically, you can only choose a dynamic torque sensor to measure it.

If you cannot find an answer to your question in our 11A Static Torque Sensor Flange-to-Shaft Mount, you can always contact us and we will be with you shortly.

More Featured Torque Sensors For Sale

Sino-Inst is a manufacturer of 11A Static Torque Sensor Flange-to-Shaft Mount. We offer more than 20 types of Static Torque Sensors. Static Torque Sensors can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Static Torque Sensor is also called reaction torque sensor, torque transducer. Mainly used for torque measurement in Static situations. 11A Static Torque Sensor, with key (through slot) connection at one end and flange connection at the other end; suitable for static torque measurement.

Sino-Inst’s Static Torque Sensors, made in China, have good quality, with better prices. Our Static Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Static Torque Sensor, level sensors, or other equipment, please give us a call.

Request a Quote

11A Static Torque Sensor Flange-to-Shaft Mount

11A Static Torque Sensor Flange-to-Shaft Mount, the resistance strain is an integrated product composed of sensitive components and integrated circuits. Static torque measurement. One end is a key connection, and the other end is a flange connection, which is easy to install and use.

Product SKU: 11A Static Torque Sensor Flange-to-Shaft Mount

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 155

Price Valid Until: 2029-09-09

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply

Your email address will not be published. Required fields are marked *