98 Flange-to-Flange Reaction Static Torque Sensor

The Reaction Static Torque Sensor is flanged at both ends. It is suitable for static torque test and torque value measurement of discontinuous rotation. During the measurement process, the rotation angle of the sensor body is less than 360 degrees. Continuous rotation is not possible. Suitable for stall testing of rotating power. Widely used in various torque testers, torque wrenches and other static torque measurement fields.

Features of 98 Flange-to-Flange Reaction Static Torque Sensor

  • The resistance strain is an integrated product composed of sensitive components and integrated circuits, with high precision and stable performance;
  • Measuring range: 0-0.2-50KN.m optional;
  • It can measure the torsion force in both positive and negative directions;
  • Both ends are flanged links, easy to install;
  • Suitable for measurement of static torque;
  • Wide measurement range, large, medium and low range can be measured, non-standard can be customized;

Technical Parameters

Range0-0.2,0.5,1,10,20,50,100,500,1000N.m…50KN.m support non-standard customization
Output1-1.5mV/V optional amplifier 0-±5V, 0-±10V, 4-20mA, 0-20mA, etc.
Zero output±1%F.S
Precision error±0.1%F.S±0.2%F.S±0.3%F.S
Hysteresis≤±0.05%F.S
Repeatability≤±0.05%F.S
Creep≤±0.03%F.S/30min
Zero temperature drift0.03%F.S/10℃
Temperature Sensitivity Drift0.03%F.S/10℃
Input resistance750±10Ω
Output resistance700±5Ω
Insulation resistance≥5000M2/100VDC
Excitation voltage9-15VDC external amplifier 12/24VDC (9-30VDC)
Temperature Compensation Range-10~60℃
Range of working temperature-20~80℃
Safe overload150%F.S limit 200%F.S
Cable Specifications5.2mm*3m
Shell materialStainless or Alloy Steel

Dimensions

98 Flange-to-Flange Reaction Static Torque Sensor Dimensions
ModelRange(Nm)ABφCφDφEFG
98A0-100851059221254-φ6.5
98B0-1000952098402068-φ10.5
98C0-50009520125504068-φ12.5
98D0-1000016030190803068-φ19
98E0-500002204530813080512-φ26

Learn More About 98 Flange-to-Flange Reaction Static Torque Sensor

The static torque sensor is an instrument that converts the strain generated by the torsional moment into an electrical signal with a linear relationship according to the principle of resistance strain.

This static in a static torque sensor means that the measuring elastomer of the sensor does not participate in relative motion.

It is widely used in testing machines, static torque detection and other test systems, and has been praised by users for its excellent stability, high measurement accuracy and high cost performance.

Read more about: Torque Transducer Measurement Principle

The flanges at both ends of the reaction torque sensor are praised by users for their excellent stability, higher measurement accuracy, higher cost performance and simpler monitoring methods.

The measuring elastic body of the sensor does not participate in the relative motion. The testing elastic body is subjected to the relative reaction force. During installation, one end is fixed and the other end is subjected to force.

Basic principle of reaction torque sensor:

Using strain gauge electrical measurement technology, a strain bridge is formed on the elastic shaft. The electrical signal of the elastic shaft being twisted can be measured by supplying power to the strain bridge.

After the strain signal is amplified, it is converted into a frequency signal proportional to the torsional strain after pressure/frequency conversion.
Or directly output standard 4~20mA current signal and 1~5V voltage signal.

The static torque sensor is generally used to test the occasions where the torque changes slowly. The sampling speed is generally lower than 50 times per second. Such as testing the manual torque wrench, the static load torque of the transmission, etc.

The application range of static torque sensor is mainly used in test systems such as experimental machines and static torque detection.

Static torque does not involve acceleration. For example, the torque of the clock spring used to move the second hand is static torque. If the car is traveling at a steady speed, it will develop a rotational static torque because it only rotates, but not acceleration.

The engine produces static and dynamic torque. For example, if you measure torque in a car crankshaft, you measure dynamic torque because cylinder firing and piston rotation of the crankshaft involve acceleration. This static in a static torque sensor means that the measuring elastomer of the sensor does not participate in relative motion.

This static in a static torque sensor means that the measuring elastomer of the sensor does not participate in relative motion. Due to its excellent stability, high measurement accuracy and high cost performance, it has been widely praised in testing machines, static torque detection and other testing systems.

Reaction torque sensor and rotary torque sensor are the two longest used types of torque sensors.

The rotary torque sensor is based on the principle of resistance strain. It transmits wirelessly and non-contact through current collectors, brushes or electromagnetic coupling. It realizes power supply and signal output, and is suitable for intermittent or low-speed measurement. Torque can be measured in both forward and reverse directions.

The rotary torque sensor shaft can be rotated 360 degrees in both positive and negative directions. It mainly measures the high-speed 360-degree rotational torque and static torque. It is generally used to test the occasions where the torque fluctuates violently. It is necessary to implement the capture torque or torque peak. Such as tightening machines, electric wrenches, Motor output torque, engine output torque, drill pipe torque.

The reaction torque sensor converts the strain generated by the torsional torque into an electrical signal that has a linear relationship with it according to the principle of resistance strain. Static means that the measuring elastomer of the sensor does not participate in relative motion. From the understanding of force, this type of test is to test the relative reaction force of the elastic body.

The entire sensor axis of reaction torque sensor cannot be rotated. The rotation angle of the entire sensor is not recommended to exceed 45 degrees, otherwise it may be wound. The reaction torque sensor is generally used to test the occasions where the torque changes slowly. The sampling speed is generally lower than 50 times per second . Such as testing the manual torque wrench, the static load torque of the transmission, etc.

  1. Dynamic torque sensor: mainly used to measure torque and speed in rotating occasions.
    Dynamic torque sensors can be divided into large-range torque sensors, micro-range torque sensors, and disc torque sensors according to their shape and range.
  2. Static torque sensor: mainly used to measure torque in non-rotating situations.

If you cannot find an answer to your question in our 98 Flange-to-Flange Reaction Static Torque Sensor, you can always contact us and we will be with you shortly.

More Featured Torque Sensors For Sale

98 Flange-to-Flange Reaction Static Torque Sensor

Sino-Inst is a manufacturer of 98 Flange-to-Flange Reaction Static Torque Sensor. We offer more than 20 types of Reaction Static Torque Sensors. Reaction Static Torque Sensors can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Reaction Static Torque Sensor is also called reaction torque sensor, torque transducer. Mainly used for torque measurement in Static situations. Reaction Static Torque Sensor, with flanges connection at both end; suitable for static torque measurement.

Sino-Inst’s Reaction Static Torque Sensors, made in China, have good quality, with better prices. Our Reaction Static Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Reaction Static Torque Sensor, level sensors, or other equipment, please give us a call.

Request a Quote

98 Flange-to-Flange Reaction Static Torque Sensor

The Reaction Static Torque Sensor is flanged at both ends. It is suitable for static torque test and torque value measurement of discontinuous rotation. During the measurement process, the rotation angle of the sensor body is less than 360 degrees. Continuous rotation is not possible. Suitable for stall testing of rotating power. Widely used in various torque testers, torque wrenches and other static torque measurement fields.

Product SKU: 98 Flange-to-Flange Reaction Static Torque Sensor

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 170

Price Valid Until: 2029-09-09

Product In-Stock: InStock

Editor's Rating:
5