The tuning fork density meter is an inline vibrating-fork sensor that measures liquid density from 0 to 2500 kg/m³ with ±1 kg/m³ accuracy. The fork tines sit directly in the process line — their resonant frequency shifts with the density Read More
An ultrasonic CO2 level indicator is a portable, non-contact device that tells you how full a liquid CO2 cylinder is without opening it, weighing it, or puncturing the wall. You hold the probe against the outside of the cylinder, press Read More
SI-100 Rigid Probe Magnetostrictive Level Transmitter Stainless probe, 0.2 to 6 m measuring range, ±0.1 mm accuracy, 4-20 mA / HART / Modbus, ATEX option. Built for atmospheric and pressurized tanks where you need a rigid stem instead of a Read More
Updated on April 18, 2026 — The Verabar flow meter is an averaging pitot tube that measures flow by sensing differential pressure across multiple ports in a pipe cross-section. It handles pipe sizes from DN50 to DN6000, covers gas, steam, Read More
Updated Apr 17, 2026 — A pressure transmitter is only as accurate as its installation. Get the mounting position wrong, run sloppy impulse lines, or skip the root valve, and you will chase phantom readings for months. This guide walks Read More
Updated Apr 17, 2026 — Differential pressure (DP) flow measurement relies on a flow element — a restriction in the pipe that creates a pressure drop proportional to flow rate. But not all flow elements perform equally. Each type trades Read More
Updated: April 15, 2026 A metal tube flow meter is a variable-area (VA) rotameter built with a stainless steel measuring tube instead of glass. A float inside the tube rises to a height proportional to the flow rate, and a Read More
Updated: April 16, 2026 | By Sino-Inst Engineering Team A float switch on a water tank is just a mechanical contact in your pump’s power loop. When the float rises, the contact opens (or closes); the pump stops (or starts). Read More
Updated: April 15, 2026 A capacitive liquid level sensor detects level by measuring the capacitance change between a probe and the tank wall (or a second probe) as the liquid rises or falls. The liquid acts as the dielectric — Read More
Updated: April 15, 2026 An inline water flow meter measures water flow while installed directly in the pipeline — no bypass, no strap-on sensors. Three technologies dominate this space: mechanical (turbine), electromagnetic, and ultrasonic. The right choice depends on pipe Read More
