SI-100 Rigid Probe Magnetostrictive Level Transmitter Stainless probe, 0.2 to 6 m measuring range, ±0.1 mm accuracy, 4-20 mA / HART / Modbus, ATEX option. Built for atmospheric and pressurized tanks where you need a rigid stem instead of a Read More
Updated on April 18, 2026 — The Verabar flow meter is an averaging pitot tube that measures flow by sensing differential pressure across multiple ports in a pipe cross-section. It handles pipe sizes from DN50 to DN6000, covers gas, steam, Read More
Updated on April 18, 2026 — Chilled water flow measurement drives HVAC energy billing, chiller plant optimization, and BTU tracking. Picking the wrong meter type wastes money on installation or produces readings that drift by 5-10% under part-load conditions. This Read More
Updated on April 18, 2026 — Most DP transmitter measurement errors trace back to installation mistakes — not faulty hardware. Incorrect mounting orientation, improperly sloped impulse lines, or a skipped commissioning step can introduce errors that persist for years. This Read More
Updated Apr 17, 2026 — A pressure transmitter is only as accurate as its installation. Get the mounting position wrong, run sloppy impulse lines, or skip the root valve, and you will chase phantom readings for months. This guide walks Read More
Updated Apr 17, 2026 — Differential pressure (DP) flow measurement relies on a flow element — a restriction in the pipe that creates a pressure drop proportional to flow rate. But not all flow elements perform equally. Each type trades Read More
Last Updated: April 7, 2026 | Author: Wu Peng, Senior Instrumentation Engineer Stilling wells isolate radar antennas from surface turbulence, foam, and obstacles. When tanks have agitation or low-dielectric liquids, a properly sized well dampens noise and stabilizes signal. This Read More
Updated: April 15, 2026 A metal tube flow meter is a variable-area (VA) rotameter built with a stainless steel measuring tube instead of glass. A float inside the tube rises to a height proportional to the flow rate, and a Read More
Updated: April 16, 2026 | By Sino-Inst Engineering Team A float switch on a water tank is just a mechanical contact in your pump’s power loop. When the float rises, the contact opens (or closes); the pump stops (or starts). Read More
Updated: April 15, 2026 A capacitive liquid level sensor detects level by measuring the capacitance change between a probe and the tank wall (or a second probe) as the liquid rises or falls. The liquid acts as the dielectric — Read More
