Totalizer flow meter is also called Totalizing flow meter. It refers to the totalizing function of the flow meter, or an instrument that can realize flow display and flow totalization.

Featured Totalizer flow meters for Sale

Totalizing flow meter water

An electromagnetic flowmeter is a common water meter in industrial flow meters. It is a fully intelligent flowmeter. It has the function of displaying instantaneous flow and accumulated flow, and there are a variety of flow units to choose from.

Read more about: Digital Water Flow Meters

And its output signal is also diversified, there are (4-20) mA, RS485, pulse, HART and other output signals to meet the needs of different working conditions.

Electromagnetic flowmeter is a commonly used flowmeter in modern flow measuring instruments. Its structure is simple, easy to install and use, and the price is relatively economical. It is very trusted by the majority of users.

For example, in the city water supply unit needs to measure the total daily water supply. At this time, you need to read the required data from the flowmeter. The instantaneous flow rate every hour and the cumulative flow rate within a specific time. It is very convenient to use.

You may like: Digital Flow Meters Guide| Liquid and Gas

Flow meter totalizer calculation

Flow meter totalizer calculation refers to the collection of this flow at a fixed frequency.

If the acquisition frequency is 10hz, that is, 10 acquisitions per second. Accumulate the data collected each time, and divide the accumulated number by 10 to get the flow per second.

If the flowmeter is working at the maximum flow rate, we assume that the value corresponding to 20ma is 65535 (generally, the PLC analog quantity does not have such a high accuracy, so how much depends on the module).

Then double-word operations can meet the requirements. First convert the analog input value into a double word. Accumulate again. After 10 times, the accumulated value is divided by 10 and then transferred to another register. This register is the real cumulative amount.

Flow totalizer working principle

The intelligent flow totalizer is composed of four parts: measurement loop, digital panel meter, regulator and power supply.

The stabilized power supply converts the 220V power supply into a stable DC voltage as the other part of the power supply. The measurement loop processes the signal (voltage, current, etc.) sent by the flow transmitter into a voltage signal.

After A/D conversion, the signal is sent to the JC-775 dedicated central processing unit for processing, and not only to the digital panel meter. Moreover, it must be sent to the regulator, and the control or alarm signal will be output according to the regulation law after comparing with the set value.

How to realize the flow accumulation function in PLC?

First of all, it must be clear that the accuracy of using PLC for flow accumulation is far inferior to electromagnetic flowmeters and other flowmeters and flow totalizers that have their own accumulation function.

For flowmeter converters with accumulation function, the flow accumulation output of the general flow converter is pulse output. High-speed counting can be performed through the high-speed pulse input terminal of the PLC to obtain the cumulative flow.

For flowmeters with only instantaneous flow output, the flow cumulative addition operation is considered in PLC.

When doing flow accumulation in the PLC, you should not use a timer to do it. Because the timer is affected by the PLC scan cycle. It is impossible to be very accurate, and the error of the accumulated data is very large.

At present, general medium and large PLCs directly or indirectly provide the “Totalizer” function block. The essence is to simply accumulate the instantaneous flow of each acquisition cycle.

You may like:

Sino-Inst is Manufacturer of Totalizer Flow Meters. We supply more than 20 kinds of Totalizer Flow Meters. 90% work with flow meters, and other types of instruments.

Totalizer Flow Meters are mainly used for flow measurement of various flowmeters.
It can work with magical flowmeter, turbine flow meter, mechanical flow meter. Especially for differential pressure flowmeters, Totalizer Flow Meters are essential.

Totalizer Flow Meters enable stable flow measurement. This greatly meets the measurement needs of many applications. Can be used from small to large tubes.

Sino-Inst’s Totalizer Flow Meters, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, the US, and other countries.

The entire team at Sino-Inst’s has received excellent training, so we can ensure that every client’s needs are met. For assistance with your product requirements, whether it’s aTotalizer Flow Meters, level sensor, or other device, give us a call.

Featured stainless steel flow meters for Sale

The corrosion resistance of stainless steel flow meters

Stainless steel flow meters are generally used in corrosive environments. According to different measuring environments and measuring mediums, stainless steel such as 304/316/316L can be used.

304 stainless steel
As a widely used steel, 18Cr-8Ni has good corrosion resistance, heat resistance, low-temperature strength and mechanical properties. It has good hot workability such as stamping and bending, and no heat treatment hardening phenomenon (non-magnetic, temperature -196℃ ~800℃).

316 stainless steel

18Cr-12Ni-2.5Mo is added with Mo, so its corrosion resistance, atmospheric corrosion resistance, and high-temperature strength are particularly good, can be used under harsh conditions; excellent work hardening (non-magnetic). Equipment used in seawater, chemical, dye, paper, oxalic acid, fertilizer, and other production equipment; photography, food industry, coastal area facilities, ropes, CD rods, bolts, nuts

316L stainless steel

18Cr-12Ni-2.5Mo low carbon as the low C series of 316 steel, in addition to the same characteristics as 316 steel, it has excellent resistance to grain boundary corrosion. Among the uses of 316 steel, products with special requirements for resistance to grain boundary corrosion.

316L stainless steel is not resistant to hydrochloric acid, because the chloride ion in hydrochloric acid will chemically react with the town in 316, and the reaction changes slowly, but there is still a problem after a long time. If it is convenient to use in the chemical industry, it is not necessary to consider materials such as lining plastic.

You may like: Digital Flow Meters Guide| Liquid and Gas

Read More about Chemical Flow Meter Guide

Parts of Flow Meter

What is a flow meter?

A flow meter is an instrument used to measure the volume or mass of gas, steam, or liquid. Based on a specific industry, there are many different names for flow meters. Such as flow meters, flow indicators, liquid flow meters, flow sensors, etc.

Most flow meters consist of three parts: primary device, sensor, and transmitter. The job of the sensor is to sense the fluid passing through the main device. The raw signal from the sensor is then converted into usable data by the transmitter. The flow meter may consist of one or more physical devices because these components are combined most of the time.

You may like:

Sino-Inst, Manufacturer for Stainless steel flow meters. For example stainless steel turbine flow meter, oval gear flow meter, sanitary flowmeters.

Sino-Inst’s Stainless steel flow meters for Corrosive liquid or gas flow, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, the US, and other countries.

Oxygen Flow Meters are digital flow meters that can measure industrial oxygen. It is very important to choose a suitable flow meter to measure and monitor the oxygen flow.

Featured Industrial Oxygen Flow Meters for Sale

Extended reading: Flow Totalizer F3000X for Data collection and calculation

Applications of industrial oxygen

Industrial oxygen generally only requires oxygen purity, and has no special requirements for other sanitary conditions. At the same time, it also contains excessive carbon monoxide, methane and other harmful gases, and the content of moisture, bacteria and dust is also high. Industrial oxygen is mainly used for welding and gas welding. , Gas cutting, etc.

Application of industrial gas oxygen

• Chemical industry: In the production of synthetic ammonia, oxygen is mainly used for the oxidation of raw gas to strengthen the process and increase the output of chemical fertilizers. Another example is the high-temperature cracking of heavy oil and the gasification of pulverized coal.
• National defense industry: Liquid oxygen is a good combustion-supporting agent for modern rockets. Liquid oxygen is also needed as an oxidant in supersonic aircraft. After being impregnated with liquid oxygen, combustible substances are highly explosive and can be used to make liquid oxygen explosives.
• Medical care: supply breathing: used in hypoxic, hypoxic, or anaerobic environment. For example diving operations, mountaineering, high-altitude flight, space navigation, medical rescue, etc.
• Other aspects: It is used as a combustion aid in combination with acetylene, propane, and other combustible gases to achieve the role of welding and cutting metals. It is widely used in various industries, especially in machinery enterprises. It is also very convenient for cutting and is the first choice A cutting method.

Guess you like: Gas Mass Flow Meter

Read more about: Industrial flow meters for Different industrial applications

Oxygen flow meters types

Several commonly used flow meters that can measure oxygen are vortex flow meters, target flow meters, differential pressure flow meters, metal tube float flow meters and thermal gas mass flow meters. Let’s pay attention to the analysis.

Vortex flowmeter measures oxygen:

It is not anti-vibration, has a high starting flow rate, and can measure large flow media. Oxygen is a small molecule gas. It cannot measure its offline flow during measurement. The flow range of the vortex street DN300 caliber is 4500～45000m3/h. (Read more about: Flow Unit Conversion Table) At the time of selection, this flowmeter cannot measure a flow rate of less than 4500 cubic meters per hour.

Read more about: How Vortex Flow Meter measure efficiently? For steam, gas, liquid 

Precession Vortex Gas Flowmeter measures oxygen:

Precession Vortex Gas Flowmeter, like vortex flowmeter, is a velocity flowmeter. The cost performance of the intelligent precession vortex flowmeter is higher than vortex flowmeter. The intelligent precession vortex flowmeter can only measure gas.

Precession Vortex Gas Flowmeter can be made into an integrated temperature and pressure compensation. And can measure various gases. Such as compressed air, oxygen, biogas, natural gas, coal gas, etc.

Read More about: Inline gas flow meter

Target flow meter measures oxygen:

The main measurement medium of this flowmeter is high viscosity, many impurities, easy to block, high temperature, low temperature, and strong corrosion. Oxygen is a pure gas, a small molecule gas, and its flow rate is slow. The target flowmeter does not meet its measurement characteristics.

Differential pressure flow meters (Bar-type series flow meters, orifice plates, wedge types, nozzles, V cones, etc.) measure oxygen:

All of them belong to a kind of throttling device. When measuring, the pressure is taken through the pressure taking port, and then converted into a flow signal output by the transmitter. In the process of converting the flow signal, the transmitter is prone to zero drift, and the stability of the flow is difficult to guarantee.

The pressure loss is larger than other flow meters, and it is difficult to accurately measure under low pressure and low flow rate conditions. Easy to get dirty and easy to block, large maintenance, can be used for general process control.

When there is no interference on site, the accuracy is greater than 2.5%, and the installation of large pipe diameter is time-consuming and laborious.

Metal tube float flowmeter measures oxygen:

This flowmeter is a mechanical flowmeter designed to measure small flow gases, with a measurement accuracy of 2.5%. There is no advantage in measuring large pipe diameters, hydrogen, and oxygen.

The flow range of DN300: 600～6000m3/h. The upper limit of flow can only reach 6000 cubic meters per hour, which cannot meet the on-site flow. Large pipe diameters are expensive and troublesome to install.

Read more about: Rotameter flow meter-Variable Area Flow Meters. Suitable for liquid and gas volumetric flow measurement and control.

Extended Reading: Metal Tube Flow Meter Applications

Thermal gas mass flow meter measures oxygen:

The oil-free degreasing treatment has been done before leaving the factory to ensure the reliable usability of the flowmeter under working conditions.

Its range can be 400-10000m3/h, which can fully reach the required flow range. It comes with temperature and pressure compensation and high measurement accuracy. Good stability, simple installation, no special maintenance. It is a high-precision, maintenance-free gas flow meter.

Read more about: What is a Flow Meter? Types and how does it work?

You may like:

Sino-Instt offer over 10 Oxygen Flow Meters, with Best Price.

A wide variety of Oxygen Flow Meters options are available to you, such as free samples, paid samples.

Sino-Inst is Oxygen Flow Meters supplier, located in China. CO2 flow meters products are most popular in North America, Mid East, and Eastern Europe.

CO2 flow meters are instruments that can measure the flow of gaseous or liquid carbon dioxide. CO2 is a common industrial gas, and effective measurement is very important.

CO2 gas flow meter

Precession Vortex Gas Flowmeter, like a vortex flowmeter, is a velocity flowmeter. The cost performance of the intelligent precession vortex flowmeter is higher than the vortex flowmeter. The intelligent precession vortex flowmeter can only measure gas. Precession Vortex Gas Flowmeter can be made into an integrated temperature and pressure compensation. And can measure various gases. Such as compressed air, oxygen, biogas, natural gas, coal gas, etc.

Precession Vortex Gas Flowmeter reference price: DN50, USD 600.00/pc.

Read more about: How Vortex Flow Meter measure efficiently? For steam, gas, liquid 

CO2 mass flow meter

The thermal gas flow meter is a flow meter that only measures gas! There are two types of installation, plug-in type, and pipeline type, and the maximum temperature of the medium can reach 300°C. And it has high precision and good stability. Measuring carbon dioxide couldn’t be better.

Tool: Volumetric Flow Rate & Pipe Diameter to Flow Speed Calculator

A thermal gas mass flow meter is a new type of flow meter that can conveniently and accurately detect the mass flow of various gases flowing in the pipeline without temperature and pressure compensation.

It can be widely used in gas process control and gas flow measurement.
The mass flow of natural gas, air, hydrogen, oxygen, chlorine, helium, argon, ammonia, biogas, coal gas, flue gas, and (except acetylene gas) flowing in the pipeline.

Guess you like: Gas Mass Flow Meter

Liquid CO2 flow meter

Liquid carbon dioxide refers to the liquefaction of carbon dioxide gas into liquid form under high pressure and low temperature. Liquid carbon dioxide is a refrigerant that can be used to preserve food and can also be used for artificial rainfall.

According to the situation of night talk about carbon dioxide, we can choose a suitable flow meter.

For example, in low temperature conditions, we can choose Low temperature Turbine Flowmeter.

In other cases, a V-cone flowmeter can also be used for measurement.

Gas mass flow controller

Read more about: Industrial flow meters for Different industrial applications

Featured CO2 flow meters for Sale

You may like:

Extended reading:
What is the K-factor in a flow meter?
Cryogenic Flow Meters|Liquid Nitrogen-Liquid Oxygen-LNG fluids

CO2 flow meter price

Sino-Instt offer over 10 CO2 flow meters, with Best Price.

A wide variety of CO2 flow meters options are available to you, such as free samples, paid samples. All of our flow meters can wokrk with the AMS NEW TREX.

Sino-Inst is CO2 flow meters suppliers, located in China. CO2 flow meters products are most popular in North America, Mid East, and Eastern Europe.

Biogas Flow Meters are instruments that can measure the flow of biogas. Could be a vortex flow meter, thermal mass flow meter, etc. Commonly used in biogas stations, biogas production fermentation tanks, etc.

renewable energy source-biogas

At present, the use of biogas is mainly concentrated in three major fields: rural areas, aquaculture, and industry.

Utilization of rural biogas
The comprehensive utilization of rural biogas can effectively solve the problem of living energy for farmers. The existing plant straw and animal manure in rural areas are used as raw materials. Use facilities such as biogas digesters to produce biogas after long-term fermentation. Provide farmers with gas, lighting, organic fertilizers.

Utilization of biogas in aquaculture
Livestock and poultry manure is put into the biogas project to produce biogas after fermentation. After the manure is fermented, it can be directly used as crop fertilizer, fish farming, pig feeding, seed soaking, etc. Promote the integration of agricultural planting and breeding. The main utilization methods are as follows: First, to provide gas for surrounding residents. The second is to provide electricity for the farm through power generation, and the remaining electricity will be connected to the grid.

Utilization of biogas in industry
The utilization of biogas in the industrial field is mainly concentrated in papermaking, brewing, food processing, sewage treatment and other industries. Industrial waste is used as raw material for fermentation to produce biogas. Mainly power generation and heat supply. Biogas can be used for internal combustion engine power generation, combustion support of large coal-fired boilers or to replace raw coal. Use small boilers to produce steam, etc.

Featured Biogas Flow Meters

Purpose of biogas flow measurement

In the process of biogas production and use, it needs to be flow metered. The main purposes are as follows:

• Provide reference data for biogas station. The purpose of installing flow meters in biogas supply stations is to provide basic data for the scheduling and control of biogas.
• Check the efficiency of fermentation tanks or landfills. Know the efficiency of the fermentation tank through the biogas flow. If the flow fluctuates unexpectedly, you can check the status of the fermentation tank in time.
• Control the combustion efficiency of the boiler. When a biogas boiler is burning, it is necessary to understand the flow of biogas to control the ventilation of the boiler. Excessive ventilation will reduce the furnace temperature. The ventilation rate is too low and the gas cannot be fully burned, causing waste and pollution.
• Control greenhouse gas emissions. Both CH4 and CO2 in biogas are greenhouse gases. Among them, CH4 is a greenhouse gas that is more harmful than CO2.
• Charges for civil biogas metering. Civil users install flow meters mainly for metering charges, and the management department conducts cost accounting.

Difficulties in biogas measurement

Biogas is a kind of gas that is very difficult to measure. It has the following characteristics:

• Very low pressure: the original biogas from the fermentation tank usually does not exceed 0.1 kg (10kPa).
• Composition changes: Biogas is composed of a variety of mixed gases. The composition of the biogas produced will fluctuate greatly depending on the raw materials for gas production.
• Large flow fluctuations: With changes in biogas raw materials, bacteria conditions, temperature fluctuations, etc., the output biogas flow rate will also vary greatly, so the flowmeter is required to have a larger turndown ratio.
• Water vapor: Biogas is produced by the fermentation of biomass, and the water in the biomass will be carried into the biogas. Therefore, the biogas usually contains saturated water vapor.
• Corrosive: Biogas usually contains H2S, although the content is low. But H2S will form corrosive hydrosulfuric acid after encountering water vapor. There is a greater potential for corrosion of metering components.

Extended reading: V-Cone Flow Meter Working Principle

Types of biogas flow meters

At present, several biogas flow measurement technologies have been widely used in the field of biogas. Mainly include turbine flowmeter, vortex flowmeter, orifice flowmeter, ultrasonic gas flowmeter, etc.

However, due to the characteristics of low biogas pressure, large changes in biogas component flow, strong corrosiveness, and viscous impurities. These flow measurement technologies also have some application problems, which bring troubles to the stability of flow measurement and daily maintenance.

Vortex flow meter to measure biogas

The vortex flowmeter is a volume flowmeter that measures the volume flow of gas, steam or liquid, the volume flow of standard conditions or the mass flow of gas, steam or liquid based on the Karman vortex principle. When the fluid flows through the dust collector rod of the vortex flowmeter, a vortex is formed. The frequency of vortex shedding is proportional to the fluid velocity. Temperature and pressure compensation can be configured.

Read more about: How Vortex Flow Meter measure efficiently? For steam, gas, liquid 

Precession vortex flowmeter to measure biogas

Precession Vortex Gas Flowmeter, like vortex flowmeter, is a velocity flowmeter. The cost performance of the intelligent precession vortex flowmeter is higher than vortex flowmeter. The intelligent precession vortex flowmeter can only measure gas. Precession Vortex Gas Flowmeter can be made into an integrated temperature and pressure compensation. And can measure various gases. Such as compressed air, oxygen, biogas, natural gas, coal gas, etc.

Precession Vortex Gas Flowmeter reference price: DN50, USD 600.00/pc.

Guess you like: Industrial oxygen flow meter Flow Measurement of Nitrogen

Thermal mass flow meter to measure biogas

Thermal Mass Flow Meter is a true mass flow meter. No temperature and pressure compensation is required. Thermal gas mass flow meters are designed based on the principle of thermal diffusion. Including natural gas, coal gas, liquefied gas, flare gas, argon, carbon dioxide and other mixed gas flow measurement.

Gas turbine flowmeter to measure biogas

The gas turbine flowmeter integrates temperature, pressure, flow sensors and intelligent flow totalizers. The gas turbine flowmeter has high accuracy and good repeatability, so it is suitable for trade measurement and industrial process detection. It is widely used in many kinds of gas in petroleum, chemical, metallurgy, aviation, scientific research and other sectors and industrial fields. Such as natural gas, city gas, propane, butane, air, nitrogen and other gases measurement.

Gas Turbine Flow Meter reference price: USD900-2500/pc

Differential pressure flow meter to measure biogas

Differential Pressure Flow Meter is also called DP flow meter. Differential pressure flow meters use the principle of differential pressure to measure the flow of liquid, gas and steam.

The measurement of biogas flow is currently a big problem. But the advent of the differential pressure flowmeter completely broke the traditional flow measurement. V-cone flowmeters, balanced flowmeters, and orifice flowmeters are typical for measuring biogas flow. Both can easily solve the problem of biogas flow measurement, with measurement accuracy and good stability.

Extended reading: [Working principle&Price]SI3051ANB Annubar Flow Meter

Biogas flow meter price

Biogas flow meter price varies according to different flow meter technologies, flow meter size and functions.

Generally speaking, vortex flowmeters are preferred to measure biogas flow. Because the technology is mature and the cost is low.
Vortex flow meter for biogas flow meter price starts from $230. Welcome to send your flow meter size to us obtain the low price cost for biogas flow measurement.

Extended reading: Featured Cheap flow meters for Sale

More Gas Flow Measurement Solutions

Sino-Inst, Manufacuturer for Biogas Flow Meters Including Orifice plate, Venturi, Annubar, etc.

Could be a vortex flow meter, thermal mass flow meter, etc. Commonly used in biogas stations, biogas production fermentation tanks, etc.

Sino-Inst’s Biogas Flow Meters, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, US, and other countries.

Featured Beer Flow Meters for Sale

More about: Sanitary Flow Meters for Sale

The Use of Beer Flow Meter in Beer Production Process

In the main technological process of beer production. For effective control in the production process. It is necessary to measure and control the intermediate raw materials – wort, sake in semi-finished products, raw juice wine in high-concentration dilution process, sterile carbonated water, final product filling and waste water generated during production.

Raw material allocation: During the preparation of raw materials for beer production. The main measurement parameters are weight and level.

Wort production: Wort is an important intermediate raw material for beer production. Its measurement involves the handover settlement between the front and rear processes (workshops), which is extremely important. Especially when the front and rear process workshops are separately accounted for. The measurement results are related to the completion of the respective production and economic indicators. Therefore, this measurement point is very important and sensitive, and accuracy is its primary indicator.

Wort has a certain viscosity, but there is no difficulty in the measurement of electromagnetic flowmeter. What needs to be considered is corrosion during the process. The flowmeter used at this measurement point can consider the electromagnetic flowmeter with PTFE lining (or PFA) and stainless steel electrode. It can prevent the corrosion of dilute hydrogen peroxide and alkaline water. Usually the diameter is between 50 and 100mm. The diameter of the flowmeter can be determined according to the flow rate and the matching process piping.

Fermentation: Sake that has been fermented and filtered. It will be transported to the next process through the pipeline – packaging. It also involves the custody transfer of the two departments. Accurate measurement of sake is also extremely important, otherwise unnecessary disputes will arise. The requirements for flow meters are similar to those for wort metering.

High concentration dilution: due to different production processes. Some beers are produced by blending high-strength ale. This requires strict control of the ratio of high-concentration original wine and sterile carbonated water. Guarantee the degree of beer after mixing.

In each production line, two electromagnetic flowmeters are required for proportional flow control. Generally, the diameter of the flowmeter for measuring wine is 50-100mm. The flowmeter for measuring water is 20-50mm. Depends on production scale. In order to ensure that the instrument has a high measurement accuracy. It should be ensured that the fluid velocity is above 1m/s. Make the flow measurement in the best working range of the instrument. At the same time, the time constant of the flowmeter should also be set smaller, generally 1 to 3s. In order to improve the sensitivity of the control and ensure the accuracy of the proportioning.

Flow meters in the production process of the beer industry have their own special requirements. For example, it is necessary to avoid the reproduction of bacteria, to facilitate frequent cleaning and to withstand the disinfection of corrosive alkaline water and hydrogen peroxide under higher temperature conditions. Specific requirements are as follows:

1. The sensor measurement circuit is simple. There are no obstructions and parts that tend to retain media.
2. All the parts and materials in contact with the medium meet the requirements of food hygiene. Such as compliance with FDA (US Food and Drug Administration), EHEDG (European Health Equipment Design Organization) requirements.
3. The parts in contact with the medium can withstand the temperature crash and corrosion when cleaning with steam, alkaline water and hydrogen peroxide.
4. When used in filling process, it should have fast response performance and high measurement accuracy.
5. Can adapt to low temperature (about 2 ℃) and humid working environment.

Read more about: What is an inline flow meter?

Sanitary Flow Meters for Beer, Wine and Spirits

Magnetic flow meter for beer flow

Beer is a conductive medium and can be measured with an electromagnetic flowmeter.
When measuring beer, you only need to use stainless steel electrodes and PTFE lining.
Electromagnetic flowmeter is a measuring instrument with high measurement accuracy and good stability. It has been widely used in beer flow measurement.

Beer flow measurement, let’s take a look at how to select a beer electromagnetic flowmeter:

1. Medium
2. Temperature
3. Pressure

When measuring beer flow, you can select according to the above three corresponding parameters. It can meet the measurement requirements on site.

Extended reading: Stainless steel flow meters|304-316 optional

Turbine flow meter for beer flow

Sanitary turbine flow meter or Hygienic turbine flowmeter. Ensure Accurate Flow Measurement in Sanitary food-processing and bio-technology industries.

Sanitary Turbine Flow Meter reference price: DN100. USD 300-700/pc.

Sanitary turbine flow meters have stainless steel bodies and come standard with Tri-Clover fittings. Sanitary flow meter is suitable for measuring liquid without impurities. It can output pulse frequency signal. It is used to detect instantaneous flow and total integrated flow. Sanitary flow meter can be used in food, sport drink, liquor and other beverage industries, in preprocess applications.

Ultrasonic flow meter for beer flow

There are three types of ultrasonic flowmeters. Like clamp type, plug-in type, pipe segment type can be used to measure the flow of beer.

Because beer is food, the clamp-on ultrasonic flowmeter is non-contact with beer. The other two require contact with the beer. According to the ease of installation and use. The clamp-on type is better than the other two.

Tri-clamp flow meter

Common sanitary flow meters are sanitary magnetic flow meter and sanitary turbine flow meter. Composed of 304/316 stainless steel. Sanitary flowmeter with Tri-Clamp fittings is easier to install and disassemble. Suitable for food hygiene industry.

The sanitary flowmeter uses a new sanitary lining material and lining technology. At the same time, a stainless steel casing and a stainless steel clamp connection are used to facilitate the quick disassembly and cleaning of the sanitary flowmeter. It is not easy to be polluted, and can effectively prevent the accumulation of measuring fluid residue in the measuring tube. It is used in the production process of mineral water, soy sauce, jam, beer, fruit juice, rice wine, milk and other foods and in the fields of hygiene and chemical industry.

Read more about: Sanitary Flow Meters-316SS,Tri clamp-Pulse- for Brewery

Brewery Oxygen-Co2 Flow Meter

Oxygen and hydrogen are special gases, so you must choose a suitable flow meter. Several commonly used flow meters that can measure oxygen are precession vortex flowmeters, vortex flowmeters, DP flowmeters and thermal gas mass flowmeters. The selection of oxygen flow meter must provide specific parameters, such as pipe diameter, working pressure, temperature, flow range, functional requirements and so on.

Oxygen flow meters types

Carbon dioxide (CO2) is a colorless, odorless gas at room temperature and pressure. We often recommend precession vortex flowmeters, v-cone flowmeters, vortex flowmeters, gas turbine flowmeters, etc. Under different working conditions, we will choose different flow meters for customers.

CO2 gas flow meters

Beverage Flow Meter

The beverage industry includes beer, fruit juice, etc., and electromagnetic flowmeters could not be better. Generally, the medium is conductive, and it is very good to add ions appropriately. And there is no loss. There is no differential pressure loss or something.

Originally, there are still many ways to protect the electrodes of the electromagnetic flowmeter. We should pay more attention to it in the process of use. Don’t cause the electromagnetic flowmeter to fail to operate normally in the future due to a little negligence.

Read more about: Flowmeter used in the beverage industry

Related Blogs

Sino-Inst, Manufacuturer for Digital Beer Flow Meters, like:  sanitary turbine flow meter, magnetic flow meters and ultrasonic flow meters.

Sino-Inst’s Digital Beer Flow Meters, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, US, and other countries.

LPG flow meter is used for flow measurement of liquefied petroleum gas. The flow measurement of LPG is very important in industrial production, transportation and trade settlement.

Featured LPG Flow Meters for Sale

Extended reading: Gas Mass Flow Meter

Features of LPG

LPG refers to petroleum gas liquefied at high pressure or low temperature, referred to as “liquefied petroleum gas” or “liquefied petroleum gas”. Its composition is propane, n-butane, isobutane and a small amount of ethane, organic compounds greater than carbon 5, unsaturated hydrocarbons and so on.

LPG has the characteristics of flammability, explosiveness, vaporization, thermal expansion, retention, electrification, corrosiveness and suffocation.

PG is mainly composed of propane (C3H8) and butane (C4H10). Some LPG also contains propylene (C3H6) and butene (C4H8).

LPG is generally obtained from petroleum gas in oil and gas fields, refineries or ethylene plants. Compared with other fuels, LPG has the following unique advantages.

• Less pollution
• High heat
• Easy to transport
• Stable pressure
• Simple storage and flexible supply

Because of the above-mentioned advantages of LPG, it is widely used as industrial, commercial and domestic fuel.

At the same time, its chemical composition determines that LPG is also a very useful chemical raw material, so it is also widely used in the production of various chemical products.

You may like: Natural Gas Flow Meter Types

LPG Flow Meter Types

Generally, when choosing a suitable LPG flow meter, we must distinguish it according to the state of the LPG.

Extended reading: 5 Industrial Propane Tank Level Indicators

You may like:

Sino-Inst, Manufacuturer for LPG flow meterss. For example: vortex flow meter. Turbine flow meter, mass fow meter, and more LPG flow meters.

Sino-Inst’s LPG flow meters, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, US, and other countries.

Wet Gas Flow Meter is an instrument used to measure industrial wet gas flow. Such as wet air, wet gas and wet chlorine, etc.

Featured Wet Gas Flow Meters for sale

LMF wet gas flow meter

LMF anticorrosive wet gas flowmeter is one of the commonly used instruments in laboratories.

When measuring the total volume of gas, its accuracy is high, especially when the flow rate is small, its error is small. It can be used directly to measure gas flow, and can also be used as a standard instrument to calibrate other flowmeters.

The effective volume of each gas chamber of the wet gas flowmeter is controlled by the water surface injected into the flowmeter in advance. Therefore, it is necessary to check whether the water surface reaches the predetermined position during use, and the instrument must be kept level during installation.

Measured medium:
LMF series wet gas flow meters are mainly divided into two models:
LML type is a common type, using brass material, generally used in the range of non-corrosive gas.
LMF type is anti-corrosion type, made of stainless steel, can measure corrosive gas-acid, alkali gas, etc.

Tool: Volumetric Flow Rate & Pipe Diameter to Flow Speed Calculator

Extended reading: Gas Mass Flow Meter

Vortex flowmeter for the volume of wet gas

When using a vortex flowmeter to measure gas flow, many wet gases are often encountered, such as wet air, wet gas, and wet chlorine.

Read more about: How Vortex Flow Meter measure efficiently? For steam, gas, liquid 

Physically, the commonly used mixture of water vapor and gas is called a mixed gas with certain humidity, that is, wet gas.

In wet gas, the density of water vapor constitutes a part of the density of the wet gas. However, in many cases, what needs to be measured and calculated is the volume or mass of dry gas. For example, this is the case when determining the heating value.

There are also wet air, wet chlorine, etc., as industrial raw gas. What companies need is a dry gas, so the “moisture” of these wet gases should be squeezed out when measuring, in order to better control the quality of products. Calculate the cost of the product.

The density of the wet gas is composed of the dry part of the wet gas and the water vapor contained in the wet gas. When the vortex flowmeter is used to measure the flow of the wet gas, because the vortex flowmeter only reflects the wet gas in the working state The volume flow rate cannot distinguish between the dry part of the wet gas and the amount of water vapor. Therefore, the volume flow measured by the vortex flowmeter is the volume flow of all wet gas. If only the volume flow rate of the dry part of the wet gas needs to be measured, the volume flow rate of the water vapor part should also be subtracted.

When using a vortex flowmeter to measure the flow of wet gas, because the vortex flowmeter only reflects the volume flow of the wet gas under working conditions, it cannot distinguish the dry part of the wet gas and the amount of water vapor.

Therefore, the volume flow measured by the vortex flowmeter is the volume flow of all wet gas. If only the volume flow rate of the dry part of the wet gas needs to be measured, the volume flow rate of the water vapor part should also be subtracted.

Read more about Gas Thermal Mass Flow Meter

Precautions for measuring wet gas with vortex flowmeter

(1) Instrument selection

For the wet gas in the industrial gas, when the water vapor reaches the saturated state, water in the free state will appear in the pipeline. This state has a certain impact on the normal operation of the thermal and ultrasonic vortex flowmeters.

If the water in the free state adheres to the surface of the thermal detection element, it will affect the thermal conductivity of the thermistor element. It will affect the detection sensitivity and the lower limit of the range of the instrument.

If the water in the free state adheres to the surface of the ultrasonic transducer, it will also affect the transmission and reception of ultrasound. It will not only affect the transmission efficiency of ultrasound, but also the effect and sensitivity of ultrasound reception.

If this free water stays in the acoustic isolation annulus between the ultrasonic transducer and the tube wall, it will cause an acoustic “short circuit” phenomenon. Ultrasonic waves will diffract along the measuring tube wall and reach the opposite receiving transducer. The normal operation of the instrument was severely damaged.

If the water in the free state passes through the sound beam in the form of water droplets or mist, it will scatter and modulate the sound beam. It will become a serious random interference and affect the stability of the measurement.

Due to the above influences, when measuring wet gas flow, vortex flowmeters with force-sensitive detection should be used. For example, stress vortex flowmeters and capacitive vortex flowmeters. Because of the moisture in the wet gas and the free water, It has little influence on force detection and transmission.

(2) Prevent the corrosive effect of wet gas

Some gases such as chlorine, hydrogen sulfide, and so on. There is a certain degree of corrosiveness in the dry state, but the corrosiveness is not very strong. Once it becomes wet gas, its corrosive effect increases sharply. When selecting the meter, the vortex flowmeter that can withstand the corrosive effect of the medium should be selected in a targeted manner to prevent the invasion of wet gas.

Extended reading: Buy Digital Gas Flow Meters & Controllers For Air-O2-N2-CO2

(3) Installation method

When measuring wet gas with a vortex flowmeter.

If installed horizontally, the measuring section should be increased appropriately. Prevent saturated water from staying in the measuring tube of the instrument.
If installed vertically, the vortex flowmeter should be at a certain height from the horizontal pipe section.

(4) Operation and maintenance of the instrument

To prevent free water from accumulating in the pipe, a drain valve or drain valve should be installed at the lowest point of the pipe. Evacuate the sewage and dirt accumulated in the pipe regularly.

You may like:

Sino-Inst’s Wet Gas Flow Meters offer reliable and accurate volume flow measurement in a large range of sizes and pressure rating while being fully compliant with international standards.

Sino-Inst is the risk-free choice for your gas flow measurement applications.

Sino-Inst supplies Wet Gas Flow Meters, like gas turbine flow meter. vortex flowmeter, mass flow meter, and more.

Sino-Inst’s Wet Gas Flow Meters, made in China, Having good Quality, With better price. Our flow measurement instruments are widely used in China, India, Pakistan, the US, and other countries.

Featured Inline Propane Flow Meter

Propane is also generally referred to as liquefied petroleum gas (LPG). So what is the difference and connection between propane and LPG? Next, let’s take a look together.

Propane VS LPG

Because propane is one of the main components of liquefied petroleum gas.

Propane is pure, and liquefied petroleum gas is a mixture.

LPG is a by-product obtained during the catalytic cracking and thermal cracking of crude oil in refineries.

The main source of commercial LPG is the processing and refining of natural gas and oil. The raw materials usually contain excessive amounts of propane and butane. To prevent these two substances from condensing in the high-pressure exhaust pipe, they must be removed.

In the petroleum refining process. LPG is collected by titration from the dissolved crude oil mixed with a lighter specific gravity. At the same time, it can also be produced by the molecular fission of heavy hydrocarbons. Therefore, LPG is considered a subsidiary product. Its exact composition and characteristics usually vary from source to source.

Extended reading: Magnetostrictive Hydraulic Cylinder Position Sensor

Precession Vortex Gas Flowmeter for LPG/Propane measurement

Precession vortex flowmeter is a new type of gas flowmeter. It can be used for the measurement of natural gas, propane, air, nitrogen, and other gases.

• Medium: no impurities, no corrosive gas
• Accuracy: soil 1.5%, ±1.0%
• Caliber: DN15~DN200
• Measuring range: 1~3600m3/h
• Display content: temperature, pressure, instantaneous flow under standard conditions, cumulative flow under standard conditions
• Connection method: flange connection
• Power supply: Lithium battery power supply or external power supply 24VDC power supply
• Output: pulse signal output, 4-20mA current output, RS485 communication, and GPRS remote communication

Advantages of Precession Vortex Gas Flowmeter.

• No mechanical rotating parts, not easy to corrode, no maintenance required for long-time work;
• It can be used on the occasion of medium and high flow rate gas;
• The process installation conditions are not harsh, and the upstream and downstream straight pipe sections of the instrument can be greatly shortened compared with the orifice flowmeter;
• The measurement accuracy of the system can meet the current trade measurement requirements (≤2%);
• The flow measurement range is wide (Qmax/qmin=15～20″>). It can work effectively in some small flow areas that the orifice flowmeter cannot reach;
• Small size and lightweight, it is more convenient for offline calibration;
• The measurement signal can be displayed on the spot or transmitted remotely as required;

Why is Precession Vortex Gas Flowmeter the right Propane flow meter?

Before that, people would use vortex flowmeters to measure propane.
Although the precession vortex flowmeter and vortex flowmeter are all fluid vibration flowmeters. However, the precession vortex flowmeter has the following advantages:

1. The generated vortex signal is stronger than that of a vortex flowmeter, so the lower limit Reynolds number is lower. When measuring gas flow, the lower limit flow rate can be as low as (1.5～2) m/s.
2. Because the vortex signal generated by the flowmeter is stronger than that of the vortex flowmeter. It is less affected by the upstream choke than the vortex flowmeter. Therefore, the length of the upstream straight pipe is much shorter.
3. The meter coefficient K is 1 to 2 times larger than that of the vortex flowmeter.

Extended reading: Buy Digital Gas Flow Meters & Controllers For Air-O2-N2-CO2

Liquid propane flow meter

Propane can be measured with a vortex flowmeter. If it is corrosive, it must be plated with PTFE, which can prevent corrosion.

Vortex shedding flow meter also called Vortex flow meter. Vortex shedding flow meter is suitable for measuring steam flow rate as well as liquids and gases.

Vortex shedding flow meter, easy installation, low cost, analog, and 4-20mA output. Pressure & temperature compensation can improve the sensor for more accurate measurement. Vortex shedding flow meter is suitable for measuring steam and various liquids and gases. When the fluid flows through the assembly line of the vortex flowmeter, a vortex is formed. The frequency of vortex shedding is directly proportional to the fluid velocity.

Vortex shedding flow meter reference price: USD 200-1500/pc.

Read more about Vortex Shedding Flow Meter Working Principle

How Vortex Flow Meter measure efficiently? For steam, gas, liquid 

Propane gas mass flow meter

Thermal Mass Flow Meter can directly measure the mass flow of various gases. Unaffected by changes in viscosity, density, temperature, or pressure.

A thermal Mass Flow Meter is a true mass flow meter. No temperature and pressure compensation is required. Thermal gas mass flow meters are designed based on the principle of thermal diffusion. Including natural gas, coal gas, liquefied gas, flare gas, argon, carbon dioxide and other mixed gas flow measurement.

Guess you like: Gas Mass Flow Meter

Natural gas flow meter

Flow Meter Selection Guide 101: Find the Perfect Fit for Your Application

Sino-Inst offers over 10 Digital Propane Flow Meters at the Best Price.

A wide variety of Digital Propane Flow Meters options are available to you, such as free samples, paid samples.

Sino-Inst is a Digital Propane Flow Meters supplier, located in China. Digital Propane Flow Meters products are most popular in North America, Mid East, and Eastern Europe. The United States, and India, which export 99%, 1%, and 1% of Digital Propane Flow Meters respectively.

Featured Inline Air Flow Meters

Inline air flow meter units conversion

Inline air flow meter cfm

CFM is a common imperial flow unit, cubic feet per minute.
For a certain volume of air flow passing in a unit time, m3/h air volume unit is generally used in China. Other countries also use the British air volume unit cfm (cubic foot per minute). That is ft3/min cubic feet/minute,
1CFM=28.316846592 L/MIN=0.028316847 m3/min

CFM traffic is divided into SCFM and ACFM.

Extended reading: [Working principle&Price]SI3051ANB Annubar Flow Meter

Inline air flow meter scfm

SCFM English standard cubic foot per minute means standard cubic foot per minute, British flow unit. Both ACFM & SCFM are units of measurement for English flow
ACFM=actual flow rate ft^3/min

SCFM=standard flow rate ft^3/min

Convert
1 cubic meter = 35.314724827664 cubic feet
1Nm^3/min=35.315 SCFM
1 liter/minute=0.03531SCFM
1 liter=0.03531SCFM

Inline air flow meter lpm

LPM is liter/minute.

Liter/minute to Cubic Meter/hour Conversion Table

Liter/minute [L/min]	Cubic Meter/hour [m^3/h]
0.01 L/min	0.0006 m^3/h
0.1 L/min	0.006 m^3/h
1 L/min	0.06 m^3/h
2 L/min	0.12 m^3/h
3 L/min	0.18 m^3/h
5 L/min	0.3 m^3/h
10 L/min	0.6 m^3/h
20 L/min	1.2 m^3/h
50 L/min	3 m^3/h
100 L/min	6 m^3/h
1000 L/min	60 m^3/h

How to Convert Liter/minute to Cubic Meter/hour?

1 L/min = 0.06 m^3/h
1 m^3/h = 16.6666666667 L/min

Example: convert 15 L/min to m^3/h:
15 L/min = 15 × 0.06 m^3/h = 0.9 m^3/h

Inline air flow meter units Converters

Converters for conversion and calculation of flow. Or a calculation tool that requires flow measurement to obtain other measurement parameters. Help users choose the right flow sensor and transmitter!

DP Flow Meter Output Calculator	Flow Meter 4-20mA Current Output Calculator	Flow Velocity & Pipe Diameter to Volumetric Flow Rate Calculator
Mass Flow & Density to Volume Flow Calculator	Mass Flow Rate Unit Converter	Volume Flow Rate Converter
Volume Flow & Density to Mass Flow Calculator	Volumetric Flow Rate & Pipe Diameter to Flow Speed Calculator

Read more about: How To Convert Air Volume Flow To Air Mass Flow?

Inline compressed air flow meter

Compressed air is an important secondary energy source for industrial production. Most of it is converted from electrical or thermal energy through compressors.

The working fluids converted from a large amount of energy are managed to achieve the effect of saving energy and improving equipment management.

Compressed air It is an important economic indicator for cost accounting of enterprises and institutions. This is the main purpose of compressed air flow measurement.

Compressed air flow is an important parameter that expresses the performance of an air compressor, and it is also an important parameter measured in an industrial process.

With the widespread application of air compressors, accurate measurement of its flow is essential for product upgrades, industrial production process control and monitoring, and energy conservation and emission reduction.

Compressed air has the following characteristics. Sino-Inst suggestion: Combine the characteristics of compressed air to make a reasonable selection of compressed air flow meters.

Extended reading: Cryogenic Liquid Nitrogen Flowmeters

You may like:

Read more about: Importance Of Air Flow Measurement

Sino-Instt offers over 10 Inline Air Flow Meters, at the Best Price.

A wide variety of Inline Air Flow Meters options are available to you, such as free samples, paid samples. All of our flow meters can wokrk with the AMS NEW TREX.

Sino-Inst is an Inline Air Flow Meters supplier, located in China. Inline Air Flow Meters products are most popular in North America, Mid East, and Eastern Europe.