Insertion Type Ultrasonic Flow Meter-Heat Meter

Our new Insertion Type Ultrasonic Flow Meter supports mono, binaural, and even quadraphonic measurements. Meet the pipeline measurement of DN80~DN6000. Compared with the single-channel ultrasonic flowmeter, the two-channel insertion ultrasonic flowmeter is more accurate, has high precision, strong stability, and is easy to install.

Technical advantages of Insertion Type Ultrasonic Flow Meter-Heat Meter

  • Single/dual/four-channel host can be selected to achieve multi-channel measurement, and fluid layer measurement is more accurate;
  • Standard output 4-20mA, RS485 signal;
  • 220V and 24V power supply options;
  • PT100, PT1000 can be connected externally; heat measurement can be realized;
  • External pressure sensor can be connected to display pressure parameters;
  • Using a high-speed ARM processor, the response speed reaches 0.1 seconds;
  • Advanced digital signal processing technology, the measurement is not interfered by impurities such as iron filings and welding slag;
  • Different sensors can be connected to solve the problem of multi-bubble application in the field;
  • It is generally used to measure pure single liquids such as tap water, air-conditioning water, and heating water. However, it should be noted that the pipe must be hard and straight, such as PVC, iron pipe, stainless steel, etc.;
  • The protection level of the host is IP67, and the protection level of the sensor reaches IP68;
  • The host and the sensor are installed separately, the host can be installed in the indoor instrument cabinet, and the instrument panel sensor is installed on the measuring pipeline;

Technical parameters: Insertion Type Ultrasonic Flow Meter-Heat Meter

Parameters
Applications
Measurable liquidMost single-phase liquids. Less than 5% particles or bubbles.
Pipe materialStainless steel, carbon steel, PVC, PPR, cement
Ambient temperature-40℃~ +60℃
Measured fluid temperature-20℃~ +150℃
Explosion-ProofFlameproof ExidII BT4
Intrinsically safe ExiaII BT4
Parameters
Velocity rangeNominal precision flow velocity range 0.1~7.0m/s
Measurement accuracy±1.0%
Sensitivity0.01m/s.
Measurement repeatability±0.2%
Host
ProtectionIP65
Power supplyExternal power supply: AC220V/DC18~27V; low power consumption: DC9~36V/built-in backup battery
Electrical InterfaceExternal power supply: waterproof head 7×M20×1.5; low power consumption: waterproof head 4×M20×1.5
LCD display128*64 dot matrix LCD screen
Keyboard input4 keys
Input and output signals
CommunicationRS485, MODBUS RTU protocol.
Flow outputSelf-powered 4-20mA output/OCT

How it works: Insertion Type Ultrasonic Flow Meter-Heat Meter

Introducing our new Insertion Type Ultrasonic Flow Meter-Heat Meter—Mono/Multi-Channel. This advanced device measures both flow and heat. Each channel is accurate, and for multi-channel products, channels support each other, improving accuracy and stability.

The measurement is based on the signal correlation method. Multi-channel products can use multiple channels at once, which greatly reduces the impact of turbulence. This makes the device more adaptable and accurate for different situations, ensuring reliable small flow and heat measurements.

Our product has a fast ARM core processor, with a response time under 0.1 seconds, making it over 10 times faster than regular flow meters. It’s great for measuring high-viscosity oils, chemical products, and ultrapure water flow. Additionally, it can connect to two temperature sensors, so it can be used as a flow or heat meter.

More Insertion Type Flow Meters

FAQ

An insertion type flow meter is a device that measures the flow of liquid or gas in a pipe. It’s installed by inserting a probe or sensor directly into the flow stream, without requiring the pipe to be cut or altered. This makes it easy to install, maintain, and remove, while providing accurate flow measurements for various applications.

The two types of ultrasonic flow meters are Doppler and Transit Time. Doppler flow meters measure the frequency shift of sound waves as they reflect off particles in the flow, while Transit Time flow meters measure the time it takes for sound waves to travel between two sensors, with the flow affecting the travel time.

The main difference between insertion and inline flow meters is how they’re installed. Insertion flow meters are installed by inserting a probe or sensor into the flow stream, while inline flow meters require the pipe to be cut and the meter to be placed directly into the pipeline. Inline flow meters usually offer higher accuracy, but insertion flow meters are easier to install and maintain.

To install an ultrasonic flow meter, first select the proper location on the pipe, ensuring it’s free of bends, valves, or obstructions. Clean the pipe surface, apply coupling gel, and mount the flow meter’s sensors according to the manufacturer’s instructions. Connect the sensors to the flow meter’s electronics, and then configure the device settings, including pipe diameter, material, and other parameters. Finally, test the flow meter to ensure accurate readings.

More Flow Measurement Solutions

Our new product, Insertion Type Ultrasonic Flow Meter-Heat Meter–Mono/multi-Channel, brings new opportunities for measuring large diameter pipes.

Multi-channel Insertion Type Ultrasonic Flow Meter can use multiple channels to work simultaneously. The impact of turbulence randomness on measurement is largely overcome. It greatly improves the adaptability and measurement accuracy of different working conditions, making the measurement of small flow (heat) more guaranteed.

Sino-Inst is a professional Insertion Type Ultrasonic Flow Meters manufacturer. Experience. If you need to measure pipeline flowmeter, please feel free to contact our sales engineers!

Request a Quote

2023 New Products! Insertion Type Ultrasonic Flow Meter-Heat Meter--Mono/multi-Channel

Our new Insertion Type Ultrasonic Flow Meter supports mono, binaural, and even quadraphonic measurements. Meet the pipeline measurement of DN80~DN6000. Compared with the single-channel ultrasonic flowmeter, the two-channel insertion ultrasonic flowmeter is more accurate, has high precision, strong stability, and is easy to install.

Product SKU: Insertion Type Ultrasonic Flow Meter-Heat Meter–Mono/multi-Channel

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 1150

Price Valid Until: 2029-09-09

Product In-Stock: PreOrder

Editor's Rating:
5