Stainless Steel Level Sensor-Pressure Guided Submersible Level Transmitter

Stainless Steel Level Sensor-Pressure Guided Submersible Level Transmitter (gas pressure type. ) The sensor part and the signal processing circuit are inside the junction box. It is used for high temperature, corrosive liquid, sewage, etc. The gas in the gas collecting cylinder is injected into the liquid Contact with the medium. The pressure is transmitted to the sensor through the air pipe. The direct contact between the sensor and the measured medium is avoided. It is suitable for occasions such as high temperature and strong corrosiveness. It effectively solves the problem of high temperature corrosive liquid and sewage level measurement. It is especially suitable for the measurement of high temperature, corrosive liquid and sewage.

Features of Stainless Steel Level Sensor

  • With high temperature resistance, all parts in contact with the medium are made of stainless steel;
  • Adopt sensor, circuit full protection design, stable and reliable performance;
  • The pressure-inducing structure ensures long product life and high precision;
  • High temperature resistance, anti-clogging, anti-corrosion, anti-condensation, anti-sewage;
  • Solid structure, no moving parts, maintenance-free after installation and use;
  • High-temperature liquid, sewage, etc. can be measured with high precision. Not affected by media foaming and deposition;
  • Easy installation, simple structure, economical and durable;
  • With power overload current limiting protection;
  • No material fatigue wear, insensitive to vibration and impact, and widely used;

Technical Parameters

1. Range: 0-100m (liquid level height/depth);
2. Output signal: 4-20mA (two-wire system), 0-20mA, 0-5V, 1-5V, RS485;
3. Load capacity: 800<ERR>
4.Insulation resistance:greater than 2000M2 (100VDC);
5. Power supply:24VDC (9~36DCV);
6. Accuracy class:0.5%FS;
7. Long-term stability:≤0.2%FS/year;
Temperature compensation:0-80℃
9. Medium temperature: 0~400℃;
10. Ambient temperature:  normal temperature (0~60℃);
Ambient humidity:≤90%RH
12. Protection class: IP68
13. Main structural material:Pressure tube material stainless steel 1Cr18Ni9Ti;The junction box is metal cast aluminum,Gas cylinder material: 304 stainless steel (medium 37mm*200mm);Airway material: 304 stainless steel (medium 4mm); (can be bent at will)304/316 stainless steel pipe optional

Extended reading: Non contact level measurement

Stainless Steel Level Sensor-Pressure Guided Submersible Level Transmitter Working Principle

The Pressure Guided Submersible Level Transmitter selects the pressure transmitter as the pressure measurement component. The liquid level pressure signal is collected by the gas collecting cylinder and transmitted to the pressure transmitter to convert the pressure signal into the liquid level signal output.

The relationship between pressure transmitter and liquid level is: P=0.0098ρH+Pc

where:
P pressure MPa;
ρ liquid density (g/cm3);
H liquid level depth (m);
Pc liquid surface pressure (normal pressure is 0)

Extended Reading: How many types of level transmitters are there?

Applications

Stainless Steel Level Sensor-Pressure Guided Submersible Level Transmitter is a good choice for diesel testing.
Its biggest advantage is simple installation and low cost. Professional commissioning and installation, setup, etc. are not required. Just put the stainless steel probe into the tank and the solid gauge head.

In the petrochemical industry, large oil tanks require a large range of high-precision liquid level sensors to monitor oil level. At present, there are many methods for measuring oil tank liquid levels:

  • Servo level sensor
  • Radar level sensor
  • Hydrostatic liquid level transmitter
  • Magnetostrictive liquid level sensor

Extended reading: Oil Level Measurement Solutions for the Oil & Gas Industry

Extended reading: Magnetostrictive Level Transmitter Working Principle

One of the more important factors to consider when choosing a submersible level meter in the wastewater treatment industry is chemical compatibility and material selection. From potable water to highly corrosive acids, submersible level
Meters are necessary to measure nearly countless liquid chemicals.

Long service life;
High-precision measurement is possible from water, oil to viscous paste;
A wide range of temperature compensation is not affected by the foaming, deposition, and electrical properties of the measured medium.

Extended Reading: Low Cost Float Level Sensor for Tank Liquid Volume Monitoring

If you want to measure the liquid level of high temperature media, in addition to the available magnetic flap, the economical choice is the submersible high temperature Stainless Steel Level Sensor.

Since the medium is high temperature, the measurement method should avoid direct contact between the probe sensor and the medium. The probe sensor can only withstand a temperature of 60 degrees. For this reason, the submersible high temperature Stainless Steel Level Sensor is structurally designed to have the probe sensor above the medium and not in contact with the medium at all. . So no matter how high the medium temperature is, the submersible high temperature Stainless Steel Level Sensor can be used freely.

When installing, just find a hole larger than Φ37mm in the liquid level tank and put it directly. The submersible high temperature Stainless Steel Level Sensor is also equipped with a display for ease of use. Reasonable prices will make every customer satisfied.

Extended reading: Flat Pressure Sensor for High Viscosity Fluids

Read More about: Introduction of Radar Level Measurement System for High-Temperature Blast Furnace

More than just liquid level, monitor your tank volume more effectively!

Monitoring liquid volume solutions

Our liquid level sensors can output liquid level signals, such as 4-20mA signal, 0-10V signal, RS485 and so on.

However, the liquid level transmitter alone cannot calculate the liquid volume of tanks of different sizes. It’s too complicated. A separate recorder is required to calculate it.

Therefore, the digital display volume meter can collect, display and convert the liquid level of various regular and irregular tanks in the industrial field into the corresponding tank volume. It is suitable for monitoring, controlling and collecting various process parameters.

Read more about: Capacitive Level Measurement System

More Featured Level Sensors

More liquid level measurement solutions

Water Level Transducers – Detailed Guide

What Is a Water Level Transducer? Water level transducers are also called Water Level Sensors, or water level transmitters. Water level transducers are used to monitor water usage and quality…

80GHZ Radar Level Transmitter

80 GHz Radar Level Measurement 80GHZ Radar Level Transmitter refers to a frequency modulated continuous wave (FMCW) radar product operating at 76-81GHz. It can be used for level measurement of…

External Tank Level Indicator

External Mounted Tank Level Sensors External Tank Level Indicator refers to an externally mounted level sensor. It is used to install on the outside of the liquid storage tank to…

Material Level Indicators

The material level indicator refers to an instrument for real-time detection of changes in the height of solid materials in a container. Material level indicator is also known as material…

Tank Level Gauges & Indicators

Tank level gauges are instruments used to indicate and control the height of the liquid level in the tank. Commonly used in water storage tanks, oil storage tanks, and underground…

Point Level Measurement Sensors

What is Point Level Measurement? Point Level Measurement refers to the use of a point level sensor to detect the material level in a storage tank or silo. Also called…

List of Radar Level Sensors

Non-contact radar level sensor Radar level sensors are used for continuous non-contact level measurement of liquids or solids. And convert it into electrical signals. The radar level sensor emits high-frequency…

Capacitive Fuel Level Sensor

The capacitive fuel level sensor refers to a capacitive liquid level transmitter used to measure the oil level. According to the principle of capacitance sensing, when the height of the…

Sino-Inst is Manufacturer of Stainless Steel Level Sensors-Pressure Guided Submersible Level Transmitters. We supply more than 40 kinds of Level Transmitters. 40% Hydrostatic Pressure Stainless Steel level meters, 30% radar level transmitters and 30% other types of flowmeters.

Stainless Steel Level Sensors are mainly used for level measurement of various liquids.
It can measure even liquids such as water, seawater, oil, and slurry. Read more about: Submersible Level Transducer Working Principle.

Stainless Steel Level Sensors enable stable level measurement without tank modifications. This greatly meets the measurement needs of many applications. Can be used from small to large tanks.

Sino-Inst’s Stainless Steel Level Sensors, made in China, Having good Quality, With better price. Our level measurement instruments are widely used in China, India, Pakistan, the US, and other countries.

The entire team at Sino-Inst’s has received excellent training, so we can ensure that every client’s needs are met. For assistance with your product requirements, whether it’s a Stainless Steel Level Sensors, flow sensor, or other device, give us a call.

Request a Quote